This paper describes a microstructural-based high cycle fatigue behaviour model applied to cast Al-Si alloys used in an automobile context. These materials are characterized by the presence of different microstructural heterogeneities at different scales: the aluminium matrix (DAS/SDAS and the precipitation hardening level), inclusions (Si particles and intermetallic) and casting defects (porosity). It is shown that the effects of these factors on the HCF damage mechanisms are important and can depend on the loading mode. A multiaxial fatigue test campaign has been carried out using three cast aluminium alloys, fabricated by different casting processes (gravity die casting and lost foam casting), associated with several heat treatment(T7 and Hot Isostatic Pressing-HIP). The HIP treatment is used to eliminate or minimise the porosity. The first part of the article is dedicated to the experimental characterization of the HCF damage mechanisms. With regard to the effect of the casting defects, a study of natural fatigue crack growth and artificial long crack growth is presented and subsequently used to choose an appropriate fatigue strength criterion to take into account the effect of defects, for different loading modes (tension, torsion and combined tension-torsion). Finally, a flexible modelling framework, providing the possibility of combining any two suitable criteria, which leads to the construction of a multiaxial Kitagawa-Takahashi diagram, is used.This work was financially supported be PSA Peugeot Citroë
Selective laser melting SLM is investigated through a study of redesign and characterization of an aeronautic part made of titanium Ti6Al4V. The part must ensure an excellent static and fatigue behaviour. The methodology developed hereby follows 3 main steps: First, the influence of laser power, laser speed and hatch distance on the amount/rate of porosity is performed to define optimized process parameters. Then, the influence of building process strategy, i.e. building direction or as-built surface roughness on the static and fatigue behaviour are studied and understood by following a vast experimental campaign. Obtained properties are finally used in a topology optimization study to find the best compromise between part weight and fatigue behavior . 3 prototypes of simulated part are produced and then characterized. Fatigue tests are conducted on the component and confirm the fatigue design proposed. Obtained results are encouraging and illustrate the fatigue design optimization of a complex Additive Manufacturing component.
L’objectif de cette étude est de proposer un critère de fatigue anisotrope pour le dimensionnement en fatigue de pièces industrielles forgées. Des résultats de différentes campagnes d’essais obtenus sur 3 nuances d’acier laminés sont tout d’abord présentés. Une attention particulière est portée à l’observation et à l’analyse des mécanismes d’amorçage à l’origine du comportement anisotrope en fatigue. Un critère de fatigue probabiliste permettant de tenir compte de la compétition possible entre différents types de mécanismes d’amorçage est ensuite développé. Ce critère permet notamment de tracer un diagramme de type Kitagawa probabiliste. The objective of this study is to propose an anisotropic fatigue criterion for the design of forged components. Results of fatigue tests done on different forged steels with different mechanical properties are presented. In situ observations show that the crack initiation mechanism changes with the fibering orientation. A probabilistic criterion that can take into account the possible competition between these two different initiation mechanisms is proposed. With this approach it is possible to plot a probabilistic Kitagawa diagram.