Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129, Turin, TO, Italy; Department of Science, Technology and Society, University School for Advanced Studies IUSS Pavia, 27100, Pavia, PV, Italy
Auto-generated profile, based on publicly available information
Premchand Premchand
Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129, Turin, TO, Italy; Department of Science, Technology and Society, University School for Advanced Studies IUSS Pavia, 27100, Pavia, PV, Italy
The production of biochar from biomass has received considerable interest due to its potential in environmental applications; however, optimizing biochar properties remains a major challenge. The objective of the present study was to investigate the synergistic effects of pyrolysis atmospheres (N2 and CO2) and chemical activation (pre- and post-pyrolysis) with NaOH and KOH on the properties of biochar useful for its environmental applications. In this study rice husk and biochar were impregnated with KOH and NaOH before and after pyrolysis, which was carried out at 600 °C under N₂ and CO₂ atmosphere. The pyrolytic yields (biochar, liquid and gas) and detailed characterization of biochar were performed. The results showed that pre-activation with both alkalis under a CO2 atmosphere slightly decreased the biochar yield and carbon contents while increasing oxygen in biochars compared to N2 atmosphere. Alkali pre-activation in the CO2 atmosphere considerably increased the specific surface area and pore volume of biochars compared to the N2 atmosphere, with KOH being more effective than NaOH. The maximum specific surface area (SSA) and pore volume (PV) of biochar obtained were 178.4 m2/g and 0.60 cm3/g for KOH activated biochar under CO2, which were 3.2 times and 30 times higher than the untreated biochar. The post-activation of biochars with both alkalis resulted in moderate improvements in textural properties. Overall, chemical activation under CO2 pyrolysis facilitated a higher level of chemical activation reactions leading to increased formation of oxygen functional groups and contributed to enhanced SSA and PV of the biochar useful for adsorption.
20 July 2024 in Journal of Environmental Chemical Engineering
Stent under expansion is one of the reasons compromising the outcomes of percutaneous coronary interventions. The most common cause of the stent under expansion is calcium deposited in the atherosclerotic plaque. Adequate plaque modification is the paramount before the placement of a stent, as the options to handle under expanded stent are limited and less effective. In this case report, we explore the usage of knuckle wire for the extrastent plaque modification, after being failed with routine methods of handling stent under expansion.