1 November 2019 in IET Radar, Sonar & Navigation
Ionospheric clutter is detrimental to target detection in high‐frequency surface‐wave radar (HFSWR). Adaptive beamforming (ABF) has been adopted to suppress the ionospheric clutter in recent years. Unfortunately, the performance of ABF degrades due to the heterogeneity of the ionospheric clutter. In this study, a new approach is proposed to suppress the ionospheric clutter. A novel heterogeneous ionospheric clutter model based on the mixture of mutually independent ionospheric clutter sources is established. The blind source separation (BSS) approach is used to separate the clutter sources first. Then the separated components are exploited to estimate the spatial covariance matrix (SCM) of the cell under test. The SCM estimation based on BSS is more accurate than the classical sample matrix inversion method under the heterogeneous ionospheric clutter. Therefore, the ABF performance improves due to the better SCM estimation. The simulation and real data results demonstrated the effectiveness of the new BSS‐based ABF method in HFSWR. The signal‐to‐clutter‐plus‐noise ratio of the new method improved compared with the traditional ABF based on the SMI method. The new method can help to detect targets under the heterogeneous ionospheric clutter. It may also be a promising methodology in other ABF applications.
17 April 2020 in IET Radar, Sonar & Navigation
High‐frequency surface‐wave radar (HFSWR) is widely used in vessel and aircraft detection, sea‐state sensing and wind‐field mapping. Target detection suffers from the ionospheric clutter, which is reflected by the ionosphere. Adaptive beamforming (ABF) has been used for ionospheric clutter mitigation. However, the performance of ABF is limited by the heterogeneous ionospheric clutter and degrees of freedom (DOF) of the antennas array. In order to improve the performance, here, the one‐dimensional ABF is expanded to two‐dimensional fast‐time space–time adaptive processing (STAP), which combines beam and range domains to obtain more DOFs than that in the ABF. In addition, the blind sources separation (BSS) method is also used to improve the spatial covariance matrix estimation accuracy of STAP in the heterogeneous ionospheric clutter background. The simulation and real data results demonstrate the effectiveness of the proposed BSS‐STAP method in HFSWR.