With the modern semiconductor supply chain, the ownership of both intellectual property (IP) and integrated circuit (IC) cannot be guaranteed. The IP piracy may take place at the untrusted IC designer or untrusted foundry without the knowledge of the original IP owner. The untrusted foundry can also perform IC piracy with reverse engineering of GDSII, overproducing the number of ICs, and shipping out-of-spec/defective devices. A holistic solution is proposed to protect the ownership of both IP owners and IC designers. In this solution, a dynamically obfuscated wrapper for split test (DOST) and a secure split test methodology together aim at preventing IP overusing at multiple abstraction levels and enabling IC designers to fully control the production, test, and authentication processes. DOST has been implemented and validated on video graphics array-liquid crystal display, floating-point and graphics unit, Leon3, and Leon3mp benchmarks. DOST enables the structural tests in the locked mode and the functional tests in the functionally unlocked mode. The results show that the proposed method is highly robust against IP and IC piracies with an insignificant area (1.381%) and power (1.276%) overhead.
The existence of counterfeit products, e.g., integrated circuits (ICs) and printed circuit boards (PCBs), in the modern semiconductor supply chain has seriously jeopardized the security and reliability of electronic systems, and has also caused the loss of suppliers’ profit and reputation. Most of existing research papers prevent or detect counterfeit IC and PCB substrate separately, without testing the PCB as a whole, and often require the assistance of external equipment. In this article, a novel ring oscillator-based PCB authentication (ROPA) methodology to detect counterfeit PCB through supply chain is proposed, which utilizes PCB trace-based ring oscillators (PTRO) assisted by on-chip ring oscillators, and a novel PCB signature extraction methodology. By switching the PCB to different load modes, the signature can reflect the process variations in PCB traces and overall impedance. The ROPA can provide both IC and PCB authentication independently of external equipments, and allows remote authentication for the user. The ROPA structure has shown advantageous area (0.301% on average) and power (0.355% on average) overhead when implemented on a number of benchmarks. Then the ROPA is implemented on a set of authentic and counterfeit FPGA development boards to verify the effectiveness on counterfeit detection. The results show that the proposed method provides 96.7% confidence in detecting tampered PCBs and 100% confidence in detecting overproduced, recycled, and cloned PCBs.
Trusted Execution Environment (TEE) has been widely implemented by modern hardware vendors to protect security and privacy-sensitive applications and data, such as Intel SGX/TDX, ARM TrustZone, AMD SEV, and RISC-V Penglai. However, existing TEE systems face challenges in balancing memory isolation among security, performance, and scalability requirements. This paper introduces a novel TEE system, Dep-TEE, which decouples memory protection (to segments) from address translation (to page tables). This design improves communication performance by dynamically adjusting memory protection capabilities, without sacrificing application compatibility, and enhances security by safeguarding against attacks on page tables. We have built a prototype of Dep-TEE based on FPGA, incorporating hardware extensions and software support. The evaluation demonstrates that Dep-TEE significantly surpasses existing TEE solutions, achieving three orders of magnitude lower communication latency and 10x greater scalability while maintaining robust security guarantees.
With the horizontal model for the modern IC supply chain, IC piracy may take place at untrusted foundry and assembly, by overproducing, shipping out-of-spec/defective devices, or reverse engineering. To protect IC design house from revenue loss, in this paper, a novel dynamically obfuscated wrapper for the secure split test (DOST) is presented, which enables IC design house to fully control the production test and authentication process. DOST has been implemented on benchmarks including VGA-LCD, FGU, Leon3, and Leon3mp. By conducting structural tests in locked mode and functional tests in temporarily unlocked mode, DOST facilitates both types of tests. Experimental results demonstrate that DOST is capable of eliminating potential IC piracy risks, with an average area and shifting power overhead limited to 1.381% and 1.276%, respectively.
13 October 2022 in ACM Journal on Emerging Technologies in Computing Systems
Recently, spin-transfer torque magnetic cell (STT-mCell) has emerged as a promising spintronic device to be used in Computing-in-Memory (CIM) systems. However, it is challenging to guarantee the hardware security of STT-mCell-based all-spin circuits. In this work, we propose a novel Physical Unclonable Function (PUF) design for the STT-mCell-based all-spin circuit (All-Spin PUF) exploiting the unique manufacturing process variation (PV) on STT-mCell write latency. A methodology is used to select appropriate logic gates in the all-spin chip to generate a unique identification key. A linear feedback shift register (LFSR) initiates the All-Spin PUF and simultaneously generates a 64-bit signature at each clock cycle. Signature generation is stabilized using an automatic write-back technique. In addition, a masking scheme is applied for signature improvement. The uniqueness of the improved signature is 49.61%. With ± 20% supply voltage and 5°C to 105°C temperature variations, the All-Spin PUF shows a strong resiliency. In comparison with state-of-the-art PUFs, our approach can reduce hardware overhead effectively. Finally, the robustness of the All-Spin PUF against emerging modeling attacks is verified as well.
An electronic system generates a large number of intended or unintended electromagnetic radiated emissions in its operating state, which can lead to potential electromagnetic compatibility (EMC) problems. To avoid the impact of these electromagnetic radiation emissions on the surrounding electronic equipment or systems, it is necessary to classify and identify these radiation emitters. In this paper, we proposed a systematic approach for radiation emitter classification and identification based on radiation emission components. Inspired by the basic emission waveform theory (BEWT), the radiation emission data of electronic systems are decomposed into three kinds of radiation emission components, and the different groups of radiation emission data can be classified or identified according to the similarity of these radiation emission components. The radiation emission (RE) spectral data of several kinds of electronic equipment, such as laptops and digital cameras, were used to verify the proposed method. The classification and identification accuracy for data corresponding to different kinds of radiation emission spectra was about 99%, which confirmed the effectiveness of this method.