4 May 2023 in IEEE Antennas and Wireless Propagation Letters
In this letter, a frequency- and polarization-reconfigurable bent monopole antenna using liquid metal is proposed. The proposed antenna is designed to operate at continuously tunable frequencies and switch between left-handed circular polarization (LHCP) and right-handed circular polarization (RHCP) states. The frequency reconfigurability is achieved by controlling the length of the liquid metal to change the electrical length of the antenna. The circularly polarization can be achieved by injecting from the inlet, and excited by orthogonal horizontal radiation as well as vertical radiation. 3 dB axial ratio bandwidth of 37.5%(3.12–4.63 GHz) in LHCP state and 48.8% (3.07–5.05 GHz) in RHCP state can be achieved. The whole antenna is characterized by continuous tunability, reconfigurable frequency and polarization, and wide tunable bandwidth. The measured results of constructed prototypes are in close agreement with the simulation results, and its feasibility is fully proved.
22 October 2024 in IEEE Sensors Journal
Utilizing gestures for human-machine interaction offers numerous benefits for both products and users. Hand Gesture Recognition (HGR) systems, particularly those using radar sensors, are gaining attention due to their potential for real-time applications. However, mainstream methods often rely on unrefined 2D or 3D radar signals, which are typically large and redundant, requiring the use of large neural network classifiers. This high computational demand limits their deployment on low-cost, resource-constrained edge platforms. In this paper, we propose a low-cost, close-range HGR system based on a 24 GHz Frequency Modulated Continuous Wave (FMCW) Multi-Input Multi-Output (MIMO) radar designed for resource-constrained environments. By applying beamforming, Constant False Alarm Rate (CFAR) target detection, and feature extraction, our experiments show that targeted signal processing on dimensions like range, velocity, and angle can effectively classify gestures. This approach achieves a recognition accuracy of 99.60% for four gesture types using a lightweight Conventional Neural Network (CNN). By focusing on efficient radar signal processing rather than complex neural networks, we successfully deployed the system on an embedded platform. The system achieved accuracy rates of 99.36%, 95.00%, and 95.64% for a well-trained user and two non-trained users, respectively.
20 April 2026 in IEEE Transactions on Microwave Theory and Techniques
This article proposes a novel design method for a circularly polarized filtering reflectarray (CPFRA). The method first exploits the inherent orthogonality of characteristic modes (CMs) to convert circularly polarized (CP) reflection responses into the modal characteristic angle difference ( $\Delta $ CA) of the reflecting cell. The $\Delta $ CA is then correlated with the modal resonance frequency difference ( $\Delta f_{\mathrm {res}}$ ), which can be effectively tuned via characteristic mode analysis (CMA). With the aid of CMA, multiple appropriate $\Delta f_{\mathrm {res}}$ are obtained to synthesize the desired CP filtering reflection response. For next-generation low-Earth orbit (LEO) satellite applications (e.g., Starlink), three design strategies for the wideband CPFRA with wide out-of-band rejection are further formulated using the proposed method and applied to a single-layer right-triangular patch reflectarray (RA) cell. By adjusting the locations of six grounded vias loaded near the three edges of the cell, multiple modal current path lengths are modified to obtain the target $\Delta f_{\mathrm {res}}$ . Ultimately, the fabricated RA exhibits a 3-dB gain bandwidth of 28.86% and a 3-dB axial ratio (AR) bandwidth of 32% in the passband, along with 15-dB rejection bandwidths of 37.92% and 33.84% in the lower and upper stopbands, respectively. These results validate the effectiveness and feasibility of the proposed design method and strategies.
26 February 2026 in IEEE Antennas and Wireless Propagation Letters
This letter presents a single-layer, wide-beam patch antenna for Ku-band wide-angle scanning phased arrays. The antenna is based on a U-slot patch and is designed using characteristic mode analysis (CMA). By sequentially loading inverted-L stubs, grounded vias that connect U-shaped strips, and open U-shaped strips on the U-slot patch, the antenna size is reduced, complementary endfire beams are introduced, and endfire radiation is enhanced, respectively, thereby enabling multiple wide-beam characteristic modes. Then, these modes are simultaneously excited at the optimized location to synthesize a hemispherical E-plane pattern. As a critical component of the proposed antenna, the grounded vias that connect the U-shaped strips are configured as two parallel equivalent inverted-F antenna (IFA) structures, enabling resonance on a low-profile single-layer substrate to produce endfire radiation for expanding beamwidth. The fabricated antenna exhibits an E-plane half-power beamwidth (HPBW) of up to 181°. Its 1×8 linear phased array prototype with defected ground structure (DGS) exhibits mutual coupling below –16.8 dB, a scanning range of ±76° for a 3‑dB gain reduction, and a sidelobe level (SLL) below –8.2 dB across the band. These results indicate the antenna's potential as a terminal in satellite-communications applications such as unmanned aerial vehicle terminals and low earth orbit (LEO) satellite constellations after further optimization.
4 February 2026 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a novel folded Fabry-Perot antenna (FFPA) architecture for profile reduction. The architecture uniquely combines an orthogonally polarized conversion reflective surface (OPCRS) at the bottom layer with a polarization-selective partially reflective surface (PSPRS) at the top layer, creating two additional transmission paths to reduce profile height while adding two adjustable reflection phase parameters. Unlike most existing low-profile Fabry-Perot antennas (FPAs), which rely on either a partially reflective surface (PRS) or a ground with specific low-reflection phase characteristics and thus face significant design complexity, the proposed FFPA eliminates these constraints and simplifies the design process. Theoretical derivations confirm that FFPAs achieve high gain with a lower profile than conventional Fabry-Perots (CFPAs) under identical PSPRS conditions, regardless of the reflection phase characteristics of the PSPRS or OPCRS. A prototype FFPA exhibits a 16.9-dBi gain comparable to that of CFPA at 73.24% (0.3755λ) of the CFPA's profile. Moreover, leveraging the OPCRS's negative reflection phase, it also achieves a 12.1-dBi gain at a mere 17.86% (0.0915λ) of the CFPA's profile. These results validate the FFPA's low-profile characteristics and design flexibility, highlighting its significant potential for multifunctional, low-profile FPA applications.
1 November 2026 in IEEE Sensors Journal