Yin Li

Yin Li

Auto-generated profile, based on publicly available information

Yin Li

Pengcheng Laboratory, Shenzhen, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 September 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MJMing Jiang
Ming Jiang
ZDZeqing Du
Zeqing Du
YLYin Li
Yin Li
SSSheng Sun
Sheng Sun
JHJun Hu
Jun Hu
This work proposes an asymmetric antenna-filter-antenna (AFA) based frequency selective surface (FSS) with quasi-elliptic bandpass response and polarization selectivity. According to the reciprocity theorem, radiation nulls of antennas can be used to introduce transmission zeros (TZs) of AFA-based FSSs. The proposed FSS consists of two patch antennas with different slots, a ground and a metallized via connecting two patch antennas. The antenna’s radiation nulls are generated by slots embedded in the patches, which act as a notch band and can be used to modulate the FSS frequency response with two TZs by varying the length of slots. The high frequency selectivity performance of FSS can be achieved without additional circuits or multilayer structures. For a potential application, we design a filtering folded reflectarray (FRA) by using the proposed FSS as its sub-reflectarray. The filtering characteristic of the proposed FRA, with steeper frequency response and flat gain in the passband, can be obtained. A prototype of filtering FRA is fabricated and measured. Good agreement is obtained between simulated and measured results.

1 December 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ZXZhi-Yong Xu
Zhi-Yong Xu
XZXiao Zhang
Xiao Zhang
YLYin Li
Yin Li
Tao YuanTao Yuan
Tao Yuan
ZQZhi Quan
Zhi Quan
This paper proposes a highly selective 3-bit ME dipole reflectarray (RA) based on the element’s filtering gain response. A novel methodology for designing a gain-filtering RA antenna is presented by means of the selective ability of RA elements. The proposed RA element is a combination of magnetoelectric (ME) dipole and split ring resonators (SRRs), which generate radiation nulls at 8.1 and 14 GHz. Thanks to the filtering functionality of the element, two non-phase-shifting areas with sharp roll-off are produced at lower and higher passband edges, meanwhile, the phase delay performs properly in the targeted band. Therefore, the gain filtering functionality can be attained by just regulating the phase distribution under the condition of practically total reflection. At last, a 3-bit phase compensation strategy is exploited, and a gain filtering RA antenna with a size of 8.4λ × 8.4λ and a focal length of 0.64 times diameter is carried out. As compared to the reported works, the proposed RA antenna exhibits a wider 3-dB gain bandwidth, lower profile, and higher out-of-band gain suppression, by using the integrated element with gain filtering characteristic.

6 January 2025 in Advanced Functional Materials
Verified
Journal Article
Closed access
JYJun Yang
Jun Yang
YLYin Li
Yin Li
JWJun Wei Wu
Jun Wei Wu
JDJun Yan Dai
Jun Yan Dai
SWSi Ran Wang
Si Ran Wang
QCqiang cheng
qiang cheng

8 August 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MJMing Jiang
Ming Jiang
WRWei Jian Ran
Wei Jian Ran
JWJun Wei Wu
Jun Wei Wu
XYXiong Yang
Xiong Yang
YLYin Li
Yin Li
TCTie Jun Cui
Tie Jun Cui
Recently, there has been tremendous interest in studying electromagnetic (EM) metamaterials. However, the full-wave simulations of large and complex metamaterials are challenging. This work proposes a novel technique for efficient and accurate simulations of metamaterials composed of finite types of units. The technique follows the framework of finite element method and boundary element method (FEM-BEM) and treats the metamaterial units by domain decomposition method (DDM). Since there are finite types of units, the various couplings among them, including the self and mutual ones, can be fully captured by analyzing characteristic subarrays. The technique first performs such analyses with low memory and CPU costs and stores the results in a database. The stored data are then used in assembling the system matrix of the overall metamaterial. Thanks to this, it is applicable to large-scale arrays without recourse to overall modeling and meshing. Furthermore, the technique significantly reduces the computational burden since only the inverse matrices of finite types of units are calculated during the iteration process of DDM. The effectiveness and accuracy of the technique are validated by realistic numerical examples. The technique facilitates accurate and efficient analyses of metamaterials and will find practical value in engineering applications, especially the design, optimization, and planning of reconfigurable intelligent surfaces (RISs).

13 February 2025 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
CMChenyang Meng
Chenyang Meng
CFChang Fang
Chang Fang
YLYin Li
Yin Li
GFGuangyin Feng
Guangyin Feng
BLBaiyang Liu
Baiyang Liu
HCHao Chen
Hao Chen
A wideband 1-bit reconfigurable transmitarray (RTA) with low cross-polarization and 2-D beam-scanning capacity is proposed for X-band applications. Based on the patch antenna, an RTA element was designed with symmetrical on the top and bottom layers, each capable of 1-bit phase control. Slots placed on the patch structure impede cross-polarization currents, improving cross-polarization discrimination (XPD) by over 10 dB compared to unslotted designs. To further suppress the cross-polarization radiation level, a dual-layer phase coding scheme is proposed. It improves XPD by carefully selecting RTA element states and configuring the phase distribution for cross-polarization symmetric cancellation, achieving an average improvement of more than 5 dB across different beam scanning angles. Owing to the symmetry of the RTA element, the proposed RTA can be fed from either the top or bottom, improving XPD in both directions. An RTA consisting of a 15 × 15-element configuration and fed by a patch antenna is designed and fabricated to demonstrate the proposed scheme. The RTA exhibits a peak gain of 18.5 dBi at 9.5 GHz and demonstrates effective ±60° scanning coverage in both principal planes, achieving an XPD of 40 dB at the scanning angle of 0°.

8 October 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
CFChang Fang
Chang Fang
XZXiao Zhang
Xiao Zhang
YLYin Li
Yin Li
Tao YuanTao Yuan
Tao Yuan
ZQZhi Quan
Zhi Quan
SWSai-Wai Wong
Sai-Wai Wong
This paper presents a dual-circularly polarized (dual-CP) reflectarray (RA) based on a single-fed CP antenna element to achieve independent beam control. A novel methodology is proposed for designing the dual-CP RA, utilizing the technique of element rotation and true time delay. Contrary to traditional methods, it separate LHCP and RHCP waves into different channels and achieve independent manipulation simultaneously, based on the polarization selectivity of CP antenna element. The proposed CP antenna element consists of a branch line coupler and a square patch. The received RHCP wave is adjusted by phase delay line connected to its port, while the LHCP wave is controlled by element rotation. Finally, continuous phase compensation strategy is employed, and a RA antenna with a size of 8.4λ × 8.4λ and focal length of 0.86 times diameter is carried out. The experiment results demonstrate the independent beams pointing at (0°, −25°) and (0°, 15°) for LHCP and RHCP waves, respectively. The realized gain of each beams peaked 24.1 and 24.0 dBic. The bandwidth with simultaneous 2-dB gain variation and 3-dB axial ratio achieves 23.4% (23.7%) for LHCP (RHCP) beam, with a profile of only 0.09λ. The aperture efficiency is 28.8%.