13 May 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A nonlinear flux observer (NFO) sensorless flux weakening control method based on a fuzzy extended state observer phase-locked loop (ESOPLL) is proposed to enhance the sensorless control performance of flux weakening states in the permanent magnet synchronous motorized spindles (PMSMS). Firstly, the mathematical model of the PMSMS and the mechanism by which it operates in flux weakening mode are analyzed. Secondly, the design process of NFO and phase-locked loop (PLL) is analyzed. The ESOPLL algorithm is proposed to replace the PLL algorithm in order to improve the accuracy of rotor angle estimation and improve the stability of flux weakening control. In addition, a fuzzy control algorithm is proposed to dynamically adjust the observer gain and the ESOPLL bandwidth gain to form the NFO-FESOPLL method, so as to improve the dynamic disturbance rejection ability of PMSMS. Finally, the effectiveness of the proposed algorithm is proved on the experimental platform. The experimental results show that the proposed algorithm has higher dynamic adjustment ability and more stable field weakening control effect.
5 March 2025 in IEEE Transactions on Instrumentation and Measurement
Electromagnetic acoustic transducers (EMATs) are non-contact in nature and eliminate the need for couplants, offering extensive potential for applications in high-temperature measurements. However, a main disadvantage of the EMAT is its low transduction efficiency, particularly in the Lorentz force mechanism, where the efficiency further decreases at elevated temperatures, often resulting in ultrasonic signals being obscured by noise; this is a challenge for the high-temperature application of the Lorentz force mechanism EMAT, but the reasons behind the temperature-induced efficiency loss have not been fully solved in existing research. Therefore, this paper proposes an analysis method to investigate the transduction efficiency of the Lorentz force mechanism EMAT at high temperatures, with the aim of identifying effective ways to increase its performance. Analytical expressions for ultrasonic wave generation and reception of the Lorentz force mechanism EMAT are derived, followed by validation through a finite element model. By combining analytical calculation solutions with experimental results, the impact of temperature-dependent parameters on the transduction efficiency is investigated and improvement methods are proposed. The research results provide a foundation for the optimal design of high-temperature Lorentz force mechanism EMATs.