19 January 2006 in Journal of Applied Polymer Science
2 August 2023 in Wood Material Science & Engineering
6 July 2024 in Safety and Health at Work
Dust generated during various wood-related activities, such as cutting, sanding, or processing wood materials, can pose significant health and environmental risks due to its potential to cause respiratory problems and contribute to air pollution. Understanding the factors influencing dust emission is important for devising effective mitigation strategies, ensuring a safer working environment, and minimizing environmental impact. This study focuses on developing an artificial neural network (ANN) model to predict dust emission values in the machining of black poplar (Populus nigra L.), oriental beech (Fagus orientalis L.), and medium-density fiberboards. The multilayer feed-forward ANN model is developed using a customized application built with MATLAB code. The inputs to the ANN model include material type, cutting width, number of blades, and cutting depth, whereas the output is the dust emission. Model performance is assessed through graphical and statistical comparisons. The results reveal that the developed ANN model can provide adequate predictions for dust emission with an acceptable level of accuracy. Through the implementation of the ANN model, the study predicts intermediate dust emission values for different cutting widths and cutting depths, which are not considered in the experimental work. It is observed that dust emission tends to decrease with reductions in cutting width and cutting depth. This study introduces an alternative approach to optimize machining-process conditions for minimizing dust emissions. The findings of this research will assist industries in obtaining dust emission values without the need for additional experimental activities, thereby reducing experimental time and costs.
1 January 2007 in Journal of Adhesion Science and Technology
The selection of the most appropriate surfacing technique is influential in the success of bonding, painting and varnishing processes. The objective of the study was to determine which surfacing technique was the most appropriate when applied as the final process in the production of structural wood members, which were subjected to shearing. The study also includes the effect on shear strength of the variables, such as type of wood, plane of cut, type of adhesive and pressing pressure, as they are directly related to the main objective of the study. In view of this objective, the changes in shear strength on radial and tangential cut surfaces of Oriental beech (Fagus orientalis Lipsky) and Scotch pine (Pinus sylvestris L.) woods having different roughness values as a result of sawing with a circular ripsaw, planing and sanding, and bonded with polyurethane (PU) and poly(vinyl acetate) (PVAc) adhesives at 3, 6 and 9 MPa pressure, were studied. The 936 specimens prepared with the objective of determining the effects of variables on bond performance were subjected to a shear test in a universal test equipment in accordance with the ASTM D 905-98 standard. The highest shear strength (13.85 N/mm2) was obtained for the Oriental beech specimens cut from their tangential surfaces with a circular ripsaw, which were glued with PVAc adhesive by applying a pressure of 9 MPa. The lowest value (4.22 N/mm2) was obtained in the specimens planed from their tangential surfaces, which were glued with PU adhesive by applying a pressure of 3 MPa. The specimens obtained from Oriental beech wood showed a higher shear strength compared to the specimens obtained from Scotch pine. In general, in both species of wood, the specimens glued with PVAc adhesive, both on the tangential surfaces and on the radial surfaces, produced higher shear strengths compared to the specimens glued with PU adhesive.
15 December 2021 in Bartın Orman Fakültesi Dergisi
Üretim sistemlerinde önemli değişimlere neden olacak 3D yazıcı teknolojileri, ortaya çıkan yeni gelişmeler ve düşen maliyetlerle, malzeme ve sonuç ürün üretimi odaklı olarak üzerinde en çok AR-GE faaliyeti yürütülen alanlardan biri haline gelmiştir. Bu çalışmada, ahşap katkılı filament ile 3D yazıcıda üretilmiş malzemenin, ahşap kaplamalarla laminasyonunun eğilme direncine etkisinin belirlenmesi amaçlanmıştır. Bu amaçla 3D yazıcıda ahşap katkılı filament kullanılarak, % 50’lik doluluk oranı ile 10 x 10 x 180 mm boyutlarında 18 adet ara katman parçası yazdırılmış ve bu parçalar ıhlamur ve kayın kaplamalar ile lamine edilmiştir. Yazıcıdan alınmış her bir malzeme kontrol grubu, kayın kaplama ve ıhlamur kaplama ile lamine edilecekler olmak üzere 3 gruba ayrılmış ve her malzemenin alt ve üst kısmına 0,5 mm kalınlığında olan bu kaplamalar PVAc tutkalı kullanılarak yapıştırılmıştır. Elde edilen lamine malzemeler üniversal test cihazında eğilme testine tabi tutulmuştur. Test sonucunun SPSS 22 programında yapılan istatistiksel değerlendirmesi sonucunda, laminasyon işleminin, eğilme direncini kayın kaplama ile %25 ve ıhlamur kaplama ile %20 arttırdığı, kayın kaplama ile lamine edilmiş malzemelerin eğilme dayanımının en yüksek (46,41 MPa) olduğu belirlenmiştir.
30 September 2022 in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
The paper aims to determine the effects of some economic, psychological and sociological motivators on motivation levels of employees in furniture industry companies depending on some socio-demographic characteristics. In order to measure their motivation levels, a questionnaire was applied to 100 people working in enterprises that employ 10 or more people, which are thought to apply a motivation system in the Furniture Manufacturers Site in Ankara. The obtained data were processed using package programs for statistical analysis and the data were evaluated. According to the results: The type of production was not effective on employee motivation. While increasing occupational health and safety and giving more responsibility provided more motivation for male employees, the openness of career paths was more effective for female employees. The effect of both factors that "job assurance" and "independent work and performance feedback" effects on employee performance increased as the working time of employees in the current workplace increased.