1 January 2020 in Journal of Wind Engineering and Industrial Aerodynamics
1 September 2020 in Physics of Fluids
To investigate the flow characteristics of the biased gap flow and the flip-flopping phenomenon at high Reynolds numbers, large-eddy simulation is adopted to simulate the crossflow around two side-by-side circular cylinders at Re = 1.4 × 105. The center-to-center pitch ratio P/D varies from 1.1 to 4. Three flow patterns, i.e., single bluff body regime, biased gap flow regime, and coupled vortex regime, have been successfully simulated. A tri-stable flow pattern is found at P/D = 1.1; namely, a single bluff body regime and a biased gap flow regime deflected to the upper or lower cylinder occur spontaneously and intermittently. In contrast to the results obtained at low Reynolds numbers, two distinct biased gap flow structures are observed at P/D = 1.2 and 1.5, respectively. For P/D = 1.2, the gap-side shear layer separated from the narrow wake cylinder further reattaches to the cylinder; namely, a series of separation bubbles would develop along the gap-side surface of the cylinder. These unsteady separation bubbles induce the inward-directed lift force on the cylinder. For P/D = 1.5, the gap-side shear layer separates directly without further reattachment, and both cylinders experience outward lift forces. It is revealed that the flip-flopping of the biased gap flow is associated with the interaction of the gap vortices and the vortex shed from the outer-side shear layer of the wide wake cylinder. Furthermore, the flip-flopping phenomenon arises initially at one particular cross section of the cylinder, rather than occurring simultaneously along the spanwise direction of the cylinder.
1 October 2021 in Physics of Fluids
To investigate the flow field evolution and resultant aerodynamic characteristics of a square cylinder during flow acceleration, large-eddy simulations were undertaken to simulate flow with a dimensionless acceleration rate ap of 0.0048. The adopted ap resembles that is likely to be experienced during a severe downburst wind storm. The tested incidence angle α ranges from 0° to 45° and the time-dependent Reynolds number Re [Re = U(t)D/v, where U(t) is the time-dependent inflow velocity and D and v are the cylinder length and the kinematic viscosity, respectively] varies from 0 to 5 × 104 throughout the simulation. Results revealed that the flow around a square cylinder in accelerated flow evolves through three distinct temporal flow phases: namely, Phase I (Ia and Ib) where no vortex shedding (the instantaneous lift force through this period is zero) is observed, Phase II, where periodic vortex shedding and associated lift force oscillations are initiated and enhanced, and Phase III where stable vortex shedding occurs. Phase I can be further broken down into Phase Ia, which is characterized by laminar shear layer separation and the existence of steady recirculation vortices in the near wake region, and Phase Ib (only present at α = 0° and 45°) which is distinguished by the presence of quasi-steady recirculation vortices behind the cylinder. Aside from the variation of flow patterns, the transient lift and drag coefficients and the wind pressure distributions, as well as the spatial evolution of three-dimensional flow structures and pressure distributions, are also elucidated in detail.