The paper presents the results of phthalates measurements in 4 companies producing or processing materials made of rubber and plastics. Six priority phthalates were determined in air samples both in the respirable and inhalable particle fractions. For the determination of phthalates, GC/MS was applied, which ensures the determination of the method at the level of 0.066 µg/m3 for fibreglass filter and polyurethane foam and 0.022 µg/m3 for Amberlite resin XAD-2, while taking 720 L of air samples. The results of the measurements showed that dimethyl phthalate, diethyl phthalate and dibutyl phthalate (DBP) dominated in all the investigated companies in the gaseous phase of air sampling. For example, in a company producing rubber details for car accessories, the concentration of DBP ranged from 54 to 74% of the total phthalate concentration determined in the gaseous phase. The inhalable particle fraction was dominated by two compounds, i.e. DBP and di(2-ethylhexyl) phthalate DEHP, and their total concentration was a significant percentage, on average over 83% of the sum of all phthalates determined in the inhalable fraction in the investigated companies. As particle size affects the location of phthalate deposition in the respiratory tract, the determination of concentration levels of individual phthalates in the gaseous phase and in inhalable and respirable fractions can provide valuable information that can be used to improve the health and safety of workers at work.
26 January 2022 in Occupational Safety – Science and Practice
Among the forms of crystalline silica (silicon dioxide minerals) that are most common in the natural and work environments are quartz and cristobalite. They are used in various industries, including in the ceramics, glass and construction industries and pose a serious health risk to workers. The respirable of crystalline silica (RCS), which penetrates into the gas exchange area of the lungs causes chronic inflammatory reactions, followed by fibrotic changes in the lung tissue and, as a result, silicosis pneumoconiosis, often leading to lung cancer. Both employers and health and safety managers have great difficulties with the interpretation and application of legal provisions concerning the measurement of RCS concentrations (for the purpose of occupational exposure assessment) and the classification of work involving exposure to respirable dust generated during technological processes. The information in this article should help you resolve these issues.
Occupational exposure to azodicarbonamide (ADCA) can occur via the respiratory tract or through skin in workplaces, e.g., in the production of plastics and rubber where it is used as a foaming agent or a porosity-increasing agent. Due to the irritant nature of ADCA on the respiratory tract, a concentration limit for it in workplace air has been established. This article presents a method for determining this substance in air. The determination method consists of the following steps: passing air containing ADCA through a glass fiber filter, extracting the substance adsorbed on the filter with acetonitrile, adding 1-naphthyl isothiocyanate and analyzing the obtained derivative using liquid chromatography. The studies were performed using an Agilent Technologies 1200 series chromatograph with a diode array detector at an analytical wavelength of 220 nm and an Ultra C18 column with a length of 25 cm and a diameter of 4.6 mm. The method is linear (r = 0.9998) in the working range of 0.08-1.6 μg/ml. This range, for an air sample of 360 l, allows for the determination of 0.002-0.04 mg of ADCA per cubic meter of air. The instrument detection limit was 0.03 ng/ml, and the instrument quantification limit was 0.10 ng/ml. The obtained values, including precision and expanded uncertainty for measurements, meet the requirements of the European standard PN-EN 482. The usefulness of the method for estimating workers' inhalation exposure to ADCA was confirmed. Med Pr Work Health Saf. 2026;77(2).
29 September 2023 in Principles and Methods of Assessing the Walking Environment