This article is focused on the optimization and design of a multipass branching microchannel heat sink for high heat flux electronics cooling applications. A multiphysics topology optimization method is used to arrive at two different branching channel solutions for the cooling of a heated plate. These optimization results are combined and synthesized into a unique multipass manifold microchannel heat sink design that has both jet and channel based characteristics. Numerical experiments for a representative electronics package were completed to evaluate the heat sink thermal and fluid performance. It is found that the derived cold plate exhibits favorable heat transfer with low pressure drop due to multiple passes through the branching microchannels. In addition to numerical results, ongoing prototype development for concept validation is described.
1 September 2020 in Computer Methods in Applied Mechanics and Engineering
The development of wide band-gap power electronics over the last two decades has stimulated a tremendous amount of research into high performance liquid cooling solutions for high heat flux (200-1000 W/cm $^{2}$ ) power semiconductor devices. A patent literature search for electronics cooling technologies was conducted in the late-2000 time frame and promising technologies for high performance thermal management were identified, at that time, for research and development. These promising technologies were separated into four categories classified as single-phase (i.e., liquid) jet impingement cooling, microchannel cooling, phase change or two-phase cooling, and near-junction including direct chip cooling. In this Letter, a perspective is provided on select patents from our group that stem from research into these technology areas from 2010 to 2022. Additionally, the thermal-fluid performance capability of each technology is briefly summarized. As a whole, the Letter provides a demonstration of the historical significance of power electronics cooling technology on the mobility industry and briefly outlines future directions for research and development.
4 July 2013 in Structural and Multidisciplinary Optimization
Rapid advancement of modern electronics has pushed the limits of traditional thermal management techniques. Novel approaches to the manipulation of the flow of heat in electronic systems have potential to open new design spaces. Here, the field of thermal metamaterials as it applies to electronics is briefly reviewed. Recent research and development of thermal metamaterial systems with anisotropic thermal conductivity for the manipulation of heat flow in ultra-thin composites is explained. An explanation of fundamental experimental studies on heat flow control using standard printed circuit board (PCB) technology follows. From this, basic building blocks for heat flux cloaking, focusing, and reversal are reviewed, and their extension to a variety of electronics applications is emphasized. While device temperature control, thermal energy harvesting, and electrothermal circuit design are the primary focus, some discussion on the extension of thermal guiding (TG) structures to device-scale applications is provided. In total, a holistic view is offered of the myriad of possible applications of thermal metamaterials to heat flow control in future electronics.