29 July 2021 in Nature Nanotechnology
13 February 2017 in Applied Physics Letters
Oxygen vacancy (Vo) is believed to control the switching mechanism of metal oxide resistive switching memory. However, an accurate and quantitative theory to prove this point of view remains absent. In this letter, we propose a model combining the Poole-Frenkel effect, space charge limited current, and the modification of Vo density to simulate the current-voltage curves. The calculated results show reasonable agreements with the experimental data, which indicates that resistive switching between high resistance state and low resistance state in the devices of Al/ZnO/p+-Si is led by the density change of Vo. Furthermore, the essence of this leading effect of Vo density is explained by electrons capture and emission via oxygen vacancies. This research demonstrates the significance of Vo in theory and gives an insight into the switching mechanism.
3 January 2022 in Applied Physics Letters
Perpendicular magnetic tunnel junctions (pMTJs) with synthetic antiferromagnetic (SAF) free layers have attracted much interest for applications on spintronic memory devices with ultrafast speed and ultralow energy. In this work, SAF free layer pMTJs (SAF-pMTJs) were designed and fabricated, in which a Ru/Ta bilayer spacer is used to form the SAF structure. We first characterized the magnetization dynamics of the SAF free layer by using ferromagnetic resonance and found that the Gilbert damping constant of the SAF free layer is around 0.019. Then, in device level studies that span from 900 nm down to 200 nm lateral size, we observed a transition of the SAF free layer from a preferred antiparallel to parallel magnetic configuration at small device sizes, which can be explained by the increased dipole interaction. The impact of the operating current was also investigated. We report an extraordinarily strong dependence, up to 144.1 kOe per A/ m2, of the offset field on the applied current, suggesting an electric-field modulation on the interlayer exchange coupling of the SAF free layer. These results will be instructive to improve the understanding of material properties and device performance of SAF-pMTJs for ultrafast, ultralow-power consumption spintronic devices.
8 July 2022 in Advanced Electronic Materials
Spintronic devices, especially electric‐field and spin–orbit torque driven magnetic tunnel junctions (MTJs), are promising candidates to replace the current memory and logic components for satisfying future computing demands. Current spin–orbit torque based MTJ devices with a single free layer and spin Hall channel still face high current density for switching. Here, 150‐nm perpendicular MTJs are designed and fabricated with a synthetic‐antiferromagnetic free layer and a bilayered spin Hall channel. The switching behavior is investigated via combination of forces from electric‐field and spin–orbit torque, where the electric field can modulate the exchange coupling of the synthetic‐antiferromagnetic free layer. Through an assistance of spin–orbit torque, bidirectional switching is obtained with switching current density as low as 3 × 103 A cm−2, which is two orders of magnitude lower than that of the current best reported values. These results suggest that electric‐field switching of synthetic‐antiferromagnetic MTJs could be a promising approach for reducing write current density of spintronic devices.
4 June 2025 in Advanced Functional Materials
Next‐generation memory and logic devices require perpendicular magnetic tunnel junctions (MTJs) with small cell size, long retention, and most importantly, low‐power operation. Spin transfer torque (STT) and spin‐orbit torque (SOT) mechanisms are the most widely used switching mechanisms for magnetic tunnel junctions, but both require high write current densities, leading to significant energy consumption. Electric field control of MTJs offers a path to drastically lower energy requirements by enabling switching without current flow. Electric field control of magnetization can be realized in multiferroic heterostructures through voltage‐controlled magnetic anisotropy (VCMA) in ferromagnets or voltage‐controlled exchange coupling (VCEC) between two exchange‐coupled ferromagnetic layers. In addition, these electric field‐controlled mechanisms can also be integrated into existing STT or SOT devices to further reduce the operational energy. Additionally, hybrid approaches combining VCEC with SOT, as well as unconventional spin‐orbit torque (USOT) in low‐symmetry materials, offer promising strategies for field‐free, ultralow‐power switching. Moreover, atomically thin 2D van der Waals (vdW) materials provide an efficient and scalable platform for electric‐field‐driven magnetization manipulation. These emerging concepts push the limits of energy efficiency and enable new functionalities for memory and logic applications beyond conventional CMOS technology.
1 February 2021 in AIP Advances
Development of L10 FePd thin films with large bulk perpendicular magnetic anisotropy and a low damping constant may permit superior scaling of next-generation ultra-high density magnetic memory elements. The buffer layer influences the L10-order parameter, static and dynamic magnetic properties of FePd and demands consideration for the design of high anisotropy strength and low damping films. In this report, we systematically investigate the perpendicular magnetic anisotropy and damping constant of the FePd thin films engineered through the Cr/(Pt, Ru, Ir, Rh), Mo/Ir, and Ir buffer layers. We observed that the Ir(001), Cr(001)/Ir(001), Cr(001)/Pt(001), Cr(001)/Rh(001), and Cr(001)/Ru(001) buffer layers can induce highly oriented (001) FePd films while the Mo/Ir buffer layer does not. Of all the buffer layers, the largest perpendicular magnetic anisotropy Ku ∼ 1.2 MJ/m3 and damping constant α ∼ 0.005 were achieved for the Cr/Pt buffered FePd sample, consistent with a high ordering parameter S ∼ 0.82. The Cr/Ru buffered FePd sample shows the lowest α ∼ 0.008, despite having a lower S ∼ 0.64 and a lower Ku ∼ 0.9 MJ/m3. These film-level properties would be sufficient for the engineering of devices that require thermally stable, sub-10 nm lateral size elements with low damping for applications of low energy-delay magnetic memory devices.