4 January 2022 in Nano Letters
18 September 2020 in Science Advances
It is desirable to experimentally demonstrate an extremely high resonant frequency, assisted by strain-spin coupling, in technologically important perpendicular magnetic materials for device applications. Here, we directly observe the coupling of magnons and phonons in both time and frequency domains upon femtosecond laser excitation. This strain-spin coupling leads to a magnetoacoustic resonance in perpendicular magnetic [Co/Pd]n multilayers, reaching frequencies in the extremely high frequency (EHF) band, e.g., 60 GHz. We propose a theoretical model to explain the physical mechanism underlying the strain-spin interaction. Our model explains the amplitude increase of the magnetoacoustic resonance state with time and quantitatively predicts the composition of the combined strain-spin state near the resonance. We also detail its precise dependence on the magnetostriction. The results of this work offer a potential pathway to manipulating both the magnitude and timing of EHF and strongly coupled magnon-phonon excitations.
12 July 2023 in Nature Communications
Contrary to topological insulators, topological semimetals possess a nontrivial chiral anomaly that leads to negative magnetoresistance and are hosts to both conductive bulk states and topological surface states with intriguing transport properties for spintronics. Here, we fabricate highly-ordered metallic Pt3Sn and Pt3SnxFe1-x thin films via sputtering technology. Systematic angular dependence (both in-plane and out-of-plane) study of magnetoresistance presents surprisingly robust quadratic and linear negative longitudinal magnetoresistance features for Pt3Sn and Pt3SnxFe1-x, respectively. We attribute the anomalous negative longitudinal magnetoresistance to the type-II Dirac semimetal phase (pristine Pt3Sn) and/or the formation of tunable Weyl semimetal phases through symmetry breaking processes, such as magnetic-atom doping, as confirmed by first-principles calculations. Furthermore, Pt3Sn and Pt3SnxFe1-x show the promising performance for facilitating the development of advanced spin-orbit torque devices. These results extend our understanding of chiral anomaly of topological semimetals and can pave the way for exploring novel topological materials for spintronic devices.
24 August 2020 in Applied Physics Letters
Bulk perpendicular magnetic anisotropy materials are proposed to be a promising candidate for next-generation ultrahigh density and ultralow energy-consumption spintronic devices. In this work, we experimentally investigate the structure, thermal stability, and magnetic properties of FePd thin films seeded by an Ru layer. An fcc-phase Ru layer induces the highly-ordered L10-phase FePd thin films with perpendicular magnetic anisotropy (Ku ∼10.1 Merg/cm3). The thermal stability of FePd samples is then studied through the annealing process. It is found that a Ku ∼6.8 Merg/cm3 can be obtained with an annealing temperature of 500 °C. In addition, the Gilbert damping constant α, an important parameter for switching current density, is determined as a function of the testing temperature. We observe that α increases from 0.006 to 0.009 for the as-deposited FePd sample and from 0.006 to 0.012 for the 400 °C-annealed FePd sample as the testing temperature changes from 25 °C to 150 °C. These results suggest that Ru-seeded FePd provides great potential in scaling perpendicular magnetic tunnel junctions below 10 nm for applications in ultralow energy-consumption spintronic devices.
3 January 2022 in Applied Physics Letters
Perpendicular magnetic tunnel junctions (pMTJs) with synthetic antiferromagnetic (SAF) free layers have attracted much interest for applications on spintronic memory devices with ultrafast speed and ultralow energy. In this work, SAF free layer pMTJs (SAF-pMTJs) were designed and fabricated, in which a Ru/Ta bilayer spacer is used to form the SAF structure. We first characterized the magnetization dynamics of the SAF free layer by using ferromagnetic resonance and found that the Gilbert damping constant of the SAF free layer is around 0.019. Then, in device level studies that span from 900 nm down to 200 nm lateral size, we observed a transition of the SAF free layer from a preferred antiparallel to parallel magnetic configuration at small device sizes, which can be explained by the increased dipole interaction. The impact of the operating current was also investigated. We report an extraordinarily strong dependence, up to 144.1 kOe per A/ m2, of the offset field on the applied current, suggesting an electric-field modulation on the interlayer exchange coupling of the SAF free layer. These results will be instructive to improve the understanding of material properties and device performance of SAF-pMTJs for ultrafast, ultralow-power consumption spintronic devices.
19 April 2022 in Journal of Applied Physics
Recent advancement in the switching of perpendicular magnetic tunnel junctions with an electric field has been a milestone for realizing ultra-low energy memory and computing devices. To integrate with current spin-transfer torque-magnetic tunnel junction and spin–orbit torque-magnetic tunnel junction devices, the typical linear fJ/V m range voltage controlled magnetic anisotropy (VCMA) needs to be significantly enhanced with approaches that include new materials or stack engineering. A possible bidirectional and 1.1 pJ/V m VCMA effect has been predicted by using heavily electron-depleted Fe/MgO interfaces. To improve upon existing VCMA technology, we have proposed inserting high work function materials underneath the magnetic layer. This will deplete electrons from the magnetic layer biasing the gating window into the electron-depleted regime, where the pJ/V m and bidirectional VCMA effect was predicted. We have demonstrated tunable control of the Ta/Pd(x)/Ta underlayer's work function. By varying the Pd thickness (x) from 0 to 10 nm, we have observed a tunable change in the Ta layer's work function from 4.32 to 4.90 eV. To investigate the extent of the electron depletion as a function of the Pd thickness in the underlayer, we have performed DFT calculations on supercells of Ta/Pd(x)/Ta/CoFe/MgO, which demonstrate that electron depletion will not be fully screened at the CoFe/MgO interface. Gated pillar devices with Hall cross geometries were fabricated and tested to extract the anisotropy change as a function of applied gate voltage for samples with various Pd thicknesses. The electron-depleted Pd samples show three to six times VCMA improvement compared to the electron accumulated Ta control sample.