1 August 2012 in International Journal of Pavement Engineering
This paper describes the development of a 3D tyre–pavement interaction model to predict the tyre–pavement contact stress distributions for future use in the mechanistic analysis of pavement responses. The ribbed radial-ply tyre was modelled as a composite structure (rubber and reinforcement), and the tyre material parameters were calibrated through load-deflection curves. The steady-state tyre rolling process was simulated using an arbitrary Lagrangian Eulerian formulation. The model results are consistent with previous measurements and validate the existence of non-uniform vertical contact stresses and localised tangential contact stresses. The analysis results show that the non-uniformity of vertical contact stresses decreases as the load increases, but increases as the inflation pressure increases. However, vehicle manoeuvring behaviour significantly affects the tyre–pavement contact stress distributions. For example, tyre braking/acceleration induces significant longitudinal contact stresses, while tyre cornering causes the peak contact stresses shifting towards one side of the contact patch. The model results provide valuable insights into understanding the realistic tyre–pavement interaction for analysing pavement responses at critical loading conditions.
1 April 2014 in Journal of Engineering Mechanics
Accurate modeling of tire-pavement contact behavior plays an important role in the analysis of pavement performance and vehicle stability control. A threedimensional (3-D) tire-pavement interaction model was developed using the finite element method (FEM) to analyze the forces and contact stresses generated during vehicle maneuvering (free rolling, braking/acceleration, and cornering). A pneumatic radial-ply tire structure with rubber and reinforcement was simulated. The steady-state tire rolling process was simulated using an Arbitrary Lagrangian Eulerian (ALE) formulation. An improved friction model that considers the effect of sliding speed on friction coefficients was implemented to analyze the effects of pavement surface friction on contact stresses, friction forces, and cornering forces. The results show that the magnitudes and non-uniformity of contact stresses are affected by vehicle maneuvering conditions. As the pavement surface friction increases, the tangential tire-pavement contact stresses at various rolling conditions (free rolling, braking/acceleration, and cornering) and the vertical contact stresses at the cornering condition increase. It is reasonable to use the constant friction coefficient when predicting tire-pavement contact stresses at the free rolling condition or at the cornering condition with small slip angles. However, it is important to use the sliding-velocity-dependent friction model when predicting the friction force at tire braking
1 April 2015 in Finite Elements in Analysis and Design
11 April 2015 in Computational Mechanics
1 October 2020 in International Journal of Solids and Structures
1 June 2012 in International Journal of Non-Linear Mechanics