30 January 2020 in Journal of Materials Chemistry C
A smart magnetorheological elastomer (MRE)-based triboelectric nanogenerator (TENG) with tunable electric–mechanical performance has been developed by assembling MREs, Cu foil and metal wires. The MRE polymer, composed of carbonyl iron and a shear stiffening elastomer matrix, shows a high response to a magnetic field, and the MR effect is 114.68% with a maximum storage modulus of 0.77 MPa. The TENG presents a positive triboelectric performance (PTP) with an increase in the loading pressure. It generates a maximum power of 55.07 μW with a voltage of 20.99 V and lights up 39 LEDs, which proves the high mechanical energy-harvesting properties. More interestingly, the TENG shows a negative triboelectric performance (NTP) under the excitation of a magnetic field owing to the high MR effect and saturated magnetization value of 147.51 emu g−1. Therefore, the overall triboelectric properties of the TENG can be precisely manipulated by alternating the external multi-fields. In addition, the intelligent TENG, with a fast response and high flexibility, functions as a portable self-powered sensor to monitor human motion, distinguish various contact materials, and perceive external magnetic fields. To this end, this work opens up a new avenue to develop a smart TENG device with tunable rheological and triboelectric properties and the self-powered wearable sensor could detect complex multi-field circumstances, which proves it has promising applications in smart energy generation systems and wearable multi-sensing electronics.
1 August 2017 in Journal of the European Ceramic Society
1 July 2019 in Review of Scientific Instruments
Thickness is an important characteristic parameter of electrospun submicron of fiber mats and membranes. The thickness of the mats directly influences performance properties such as permeability and is necessary when determining volumetric parameters such as porosity. Typical electrospun mats are very thin (less than 1 mm) and highly compressive due to the small diameter fibers, both of which make accurate measurements difficult when using conventional methods. An accurate measure of the thickness is desired for characterizing and comparing membrane performances. In this work, a thickness measurement instrument using laser interferometry has been designed to measure electrospun fiber mat thickness. A small disk is used to apply a small (reproducible) force applied across a reasonably small area of the fiber mat. A traversing pin moves to contact the disk and completes an electrical circuit to stop movement and determine the location of the disk relative to a reference plane. The fiber mat thickness is determined by measuring the difference in locations of the disk with and without the fiber mat between the disk and the reference plane. The prototype is simple to operate and user-friendly. Precision and accuracy of the prototype are discussed.