A. Ya. Boduen

A. Ya. Boduen

Auto-generated profile, based on publicly available information

A. Ya. Boduen

Saint Petersburg Mining University

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2020 in Solid State Phenomena
Verified
Journal Article
Closed access
PDF file
ABAleksandr Bulaev
Aleksandr Bulaev
VMVitaliy Melamud
Vitaliy Melamud
ABAnna Boduen
Anna Boduen
Tank bioleaching of substandard arsenic-bearing sulfide copper–zinc concentrate, containing 1.70, 6.22, and 7.30% of arsenic, copper, and zinc, was performed. The concentrate contained pyrite, chalcopyrite, tennantite, and sphalerite. Bioleaching was performed at 40°C using a mixed culture of acidophilic microorganisms in two modes. In the first mode, pulp density was 10%, while in the second it comprised 15%. Bioleaching made it possible to extract 17 and 70% of copper and zinc in the first mode, and 15 and 72% of copper and zinc in the second mode. The results obtained that bioleaching can be an effective approach to remove zinc from substandard copper-zinc concentrates. At the same time, copper minerals, including arsenic-bearing mineral tennantite, may be comparatively resistant to bioleaching, so requires the development of novel hydrometallurgical approaches for effective processing.

19 January 2022 in Minerals
Verified
Journal Article
Open access
PDF file
ABAleksandr Bulaev
Aleksandr Bulaev
ABAnna Boduen
Anna Boduen
The goal of the present work was to evaluate the possibility of improving the efficiency of the stirred tank reactor biooxidation of sulfide gold-bearing concentrate by means of addition of carbon sources required for the constructive metabolism of microorganisms. Biooxidation experiments were performed on gold-bearing pyrite-arsenopyrite concentrate in continuous mode at 45 °C to determine the influence of additional carbon sources (carbon dioxide and molasses) on sulfide mineral oxidation. The use of CO2 allowed increasing the efficiency of the biooxidation and the extents of sulfide sulfur (Ss) oxidation and gold recovery were 79% and 84%, respectively. Biooxidation in a control experiment (without additional carbon sources) and when using molasses allowed achieving 39% and 66% oxidation of Ss as well as 73% and 81% of gold recovery. Analysis of the microbial populations formed in biooxidation reactors using NGS methods demonstrated that CO2 application led to an increase in the relative abundance of the genus Sulfobacillus. Thus, it was determined that application of additional carbon source makes it possible to manage the biooxidation process, affecting both sulfide mineral oxidation and microbial population composition.

25 October 2023 in Processes
Verified
Journal Article
Open access
PDF file
ABAnna Boduen
Anna Boduen
MZMaxim Zalesov
Maxim Zalesov
VMVitaliy Melamud
Vitaliy Melamud
VGVictoria Grigoreva
Victoria Grigoreva
ABAleksandr Bulaev
Aleksandr Bulaev
Microbially assisted bio-oxidation of sulfide concentrates in stirred-tank reactors (stirred-tank reactor bio-oxidation (STRB)) and acid pressure oxidation (POX) are widely used to pretreat refractory sulfide concentrates and increase gold extraction via cyanidation. Continuous STRB requires a comparatively long residence time; however, in some cases, it cannot effectively oxidize some sulfide minerals. POX enables oxidation in a short residence time. At the same time, if a processed concentrate contains a large amount of sulfur, it decreases the ratio of the solid mineral phase to liquid (pulp density) during POX and limits its economic attractiveness. In the present work, experiments were performed to investigate the problems associated with both processing methods for refractory sulfide concentrates. The experiments combined both treatments (STRB and POX) based on the example of a pyrite–arsenopyrite gold-bearing concentrate. The gold recovery from the untreated concentrate via cyanidation reached 58%. Continuous STRB for 2, 4, and 6 days oxidized 43, 74, and 79% of the sulfide sulfur (Ss), respectively. The gold recovery rates from the bio-oxidation residues were 68, 82, and 88%, respectively. The pressure oxidation of both the concentrate and STRB residues increased Ss oxidation by 97–99% and gold recovery by 96–97%. For 2 days, STRB decreased the Ss content and increased the possible liquid-to-solid ratio for POX. The combined processes result in a new promising direction because the POX stage allows high gold recovery, whereas combining STRB and POX provides products for further POX in terms of Ss content and increases POX productivity.

28 July 2022 in Microbiology Research
Verified
Journal Article
Open access
PDF file
AAAlena Artykova
Alena Artykova
YEYuliya Elkina
Yuliya Elkina
ANAleksandra Nechaeva
Aleksandra Nechaeva
VMVitaliy Melamud
Vitaliy Melamud
ABAnna Boduen
Anna Boduen
ABAleksandr Bulaev
Aleksandr Bulaev
In the present work the effect of alkaline sulfide leaching (ASL) on the extraction of copper and zinc from low-grade copper concentrate containing chalcopyrite, tennantite, sphalerite, and pyrite during batch and continuous bioleaching experiments was studied. It was demonstrated that ASL and further bioleaching may be a promising approach for treatment of copper–zinc concentrates containing tennantite as this approach allows increasing copper extraction degree in comparison to one-stage bioleaching by 1.6–2.3 times. Thus, ASL was shown to be effective for pretreatment of tennantite containing concentrates to improve bioleaching for copper extraction. At the same time, ASL led to decrease in zinc extraction by 1.4–1.5 times. Therefore, the development of combined hydrometallurgical processes including ASL and bioleaching for effective metal leaching requires further studies to avoid negative effect on zinc extraction.

23 October 2013 in Journal of Materials Science Research
Verified
Journal Article
Open access
PDF file
ABAnna Boduen
Anna Boduen
GPGeorge Petrov
George Petrov
MTMaria Ttoitskaya
Maria Ttoitskaya
SFSvetlana Fokina
Svetlana Fokina
Russia possesses a high potential for resource growth and platinoid reserves, and technogenic waste of complex ore processing can become a considerable part of the process in the near future. It is practical to take into account impounded mill tailings of sulphide copper-nickel ores, old pyrrhotine concentrates (OPC), impounded magnetite concentrates and slag-dust dumps of the mining and metallurgical company “Norilsk Nickel” (MMC NN), as well as technogenic platinum-metal chromite placer deposits of Ural and Aldan. In spite of big volumes, secondary resources are characterized by unstable content of PGM and nonferrous metals. The forms of finding platinum group metals are so that raw material is difficult to be processed by conventional technological schemes. At that production cost of PGM extraction from technogenic deposits sometimes can be lower than when concentration of initial ores and sands, whereas the cost intensive operations connected with mining, crushing, grinding and classification are excluded from the processing chain.

29 March 2024 in Molecules
Verified
Journal Article
Open access
PDF file
KVKhussain Valiyev
Khussain Valiyev
ABAliya Bugubaeva
Aliya Bugubaeva
ANAleksandra Nechaeva
Aleksandra Nechaeva
AAAlena Artykova
Alena Artykova
VMVitaliy Melamud
Vitaliy Melamud
ABAleksandr Bulaev
Aleksandr Bulaev
The possibility of selective Cu and Zn leaching from the sample of old pyrite tailings, which is one of the most widespread types of solid waste forming during non-ferrous metal production, using sulfuric acid solutions and water was studied. It was shown that water leaching provided selective extraction of Cu and Zn and comparatively low iron ion extraction. At the same time, acid leaching provided the obtainment of pregnant solutions with high ferric ion concentration, which can be used for oxidative leaching of substandard copper concentrates. Water and acid leaching also provided increased Au recovery by cyanidation. The results suggest that acid leaching can be an effective approach for processing old flotation tailings, which allows the extraction of base metals from these wastes and treating flotation tailings for subsequent cyanidation. Effective flotation treatment methods should also provide environmental load reduction, which is caused by the long-term storage of metal-bearing wastes.