29 November 2021 in Journal of Vibration Engineering & Technologies
23 April 2022 in Shock and Vibration
Early diagnosis of failures can prevent financial losses and industry downtime. In this article, the author proposes an early fault diagnosis technique for rotor-bearing faults. The proposed technique is based on the recognition of sound signals. The author measured and analyzed the three states of the rotor-bearing system: the rotor-bearing system under normal operating conditions, the rotor-bearing system with faulty bearings, and the rotor-bearing system with rotor friction. In this article, an original feature extraction method is described, namely, the 1/3 doubling method (a method of selecting the amplitude of the frequency ratio that is a multiple of 30 of the maximum amplitude). This method is used to form feature vectors. A classification of the obtained vectors was performed by the KNN (K-nearest neighbor classifier), the SVM (support vector machine), and the decision tree. The method is also compared with the Fourier synchrosqueezed transform. The experimental results show that the method can diagnose early faults of rotor-bearing systems simply and quickly and can be used to protect the safe operation of mechanical equipment.
10 April 2025 in Acta Astronautica
3 January 2026 in Measurement
21 October 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In view of the current situation that there are few studies on whether the fault signals that may occur in the rotor bearing system can be identified and analyzed in the sensor arrangement, fault diagnosability is applied to the optimal arrangement of the sensors in the rotor bearing system. The preliminary layout of the multi-sensor is carried out by analyzing the transmission path of the vibration signals in the rotor bearing system and based on the minimum path. Secondly, the nonparametric kernel density estimation method calculates the state information’s probability density function. The K-L divergence value is further used to measure fault detectability, fault separability, and fault diagnosability. Then, the correlation function method is used to fuse the multi-sensor information, and the optimal sensor layout is given with the fault diagnosability as an index. Finally, the validity of the method is proved by the experimental laboratory data and the correlation coefficient.
14 October 2024 in IEEE Transactions on Aerospace and Electronic Systems
With advancements in reusable liquid rocket engine technology to meet the diverse demands of space missions, engine systems have become increasingly complex. In most cases, these engines rely on stable open-loop control and closed-loop regulation systems. However, due to the high degree of coupling and nonlinear dynamics within the system, most transient adjustments still depend on open-loop control. Open-loop control often fails to provide the optimal control strategy when encountering external disturbances. To address this issue, we introduce the Intrinsically Motivated TD3 (IM-TD3) algorithm, specifically designed for the startup process of LOX/Kerosene high-pressure staged combustion engine. This approach leverages intrinsic motivation to enable the algorithm to adapt to the abrupt parameter changes during the start-up process. A series of comprehensive experiments were conducted to verify the effectiveness of our method. The experimental results demonstrate that our method outperforms both the PID method and previous researchers' RL methods based on the TD3 algorithm and DDPG, achieving a faster and more stable start-up process and significantly enhancing engine performance.