26 January 2024 in Journal of Crystal Growth
12 October 2023 in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
Corundum-structured chromium oxide (a-Cr2O3), exhibiting p-type conductivity, is a highly attractive candidate for forming high-quality p-n heterojunctions with a-Ga2O3. Two CVD growth techniques were employed in the fabrication of the heterostructure. A ~ 0.2-micron a-Cr2O3 layer was grown on a (0001) sapphire substrate using mist CVD at 800 °C. It possesses high morphological homogeneity and low roughness, which is acceptable for further epitaxial processes. Subsequently, Sn-doped a-Ga2O3 with a thickness of ~ 1.5 µm was grown on the a-Cr2O3 layer using HVPE at 500 °C. The feasibility of fabricating this heterostructure with the specified layer thickness and acceptable surface morphology using CVD techniques has been demonstrated
24 January 2025 in Physica Status Solidi (b)
1 January 2020 in Журнал технической физики
Толстые эпитаксиальные слои alpha-Ga 2 O 3 : Sn на профилированной сапфировой подложке
1 January 2021 in Frontier materials & technologies
ISIoffe Physical-Technical Institute of the Russian Academy of Sciences
Ioffe Physical-Technical Institute of the Russian Academy of Sciences
ISInstitute of Problems of Mechanical Engineering of the Russian Academy of Sciences
Institute of Problems of Mechanical Engineering of the Russian Academy of Sciences
АГАлександр Сергеевич Гращенко
Александр Сергеевич Гращенко
Gallium oxide (Ga2O3) is a wide-band semiconducting material with an energy gap width Eg=4.8–5.0 eV, high conductivity (λ~10.9–27.0 W/(m·K)), and radiation and chemical resistance. Its energy gap width and conductivity allow in the future using the material in the structures of power equipment and optoelectronic devices to increase their energy performance, i.e. to decrease heating and increase productive capacity. Radiation resistance, high breakdown field, and optical asymmetry of Ga2O3 make it attractive for application when designing UV-photoelectric receivers and space systems. The electrical and optical properties of Ga2O3 are amply studied, but there are no systematic data on its physical and mechanical properties (hardness, Young’s modulus, and crack resistance). The paper investigated the deformation in α-Ga2O3 epitaxial layers during nanoindentation. For indentation, the authors used NanoTest (Micro Materials Ltd.) hardness meter. The surface (0001) of α-Ga2O3 crystalline layers produced in the process of chloride gas epitaxy on sapphire (Al2O3) substrates with basic (0001) orientation was investigated. For the first time, the authors experimentally obtained the values of α-Ga2O3 hardness and Young’s modulus using the Oliver-Farr method. The dependences of the indentation load on the penetration depth demonstrated the deviation from linearity, including stress relaxation coming from the pop-in phenomenon. The average values of nanohardness H and Young’s modulus E were 17 and 281 GPa, respectively. The obtained H and E values demonstrate higher characteristics compared to the formerly studied β-Ga2O3 epitaxial layers. This discrepancy can be explained by the more close-packed arrangement of the α-Ga2O3 structure (the corundum type) than one of monoclinic β-Ga2O3. The study shows that α-Ga2O3 leaves the majority of semiconducting materials behind in its mechanical properties conceding only to gallium nitride (GaN) and sapphire (Al2O3)
26 August 2025 in Journal of Crystal Growth