Dan Zhao

Dan Zhao

Auto-generated profile, based on publicly available information

Dan Zhao

Shanxi Disel Engine Co., Ltd., Datong 035600, China

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 February 2023 in Molecules
Verified
Journal Article
Open access
PDF file
JJjinzhang jia
jinzhang jia
YXYinghuan Xing
Yinghuan Xing
LBLI BIN
LI BIN
DZDan Zhao
Dan Zhao
YWYumo Wu
Yumo Wu
DWDongming Wang
Dongming Wang
In order to quantitatively study the difference in occurrence content of functional groups in coals with different metamorphic degrees, the samples of long flame coal, coking coal, and anthracite of three different coal ranks were characterized by FTIR and the relative content of various functional groups in different coal ranks was obtained. The semi-quantitative structural parameters were calculated, and the evolution law of the chemical structure of the coal body was given. The results show that with the increase in the metamorphic degree, the substitution degree of hydrogen atoms on the benzene ring in the aromatic group increases with the increase in the vitrinite reflectance. With the increase in coal rank, the content of phenolic hydroxyl, carboxyl, carbonyl, and other active oxygen-containing groups gradually decreased, and the content of ether bonds gradually increased. Methyl content increased rapidly first and then increased slowly, methylene content increased slowly first and then decreased rapidly, and methylene content decreased first and then increased. With the increase in vitrinite reflectance, the OH-π hydrogen bond gradually increases, the content of hydroxyl self-association hydrogen bond first increases and then decreases, the oxygen-hydrogen bond of hydroxyl ether gradually increases, and the ring hydrogen bond first significantly decreases and then slowly increases. The content of the OH-N hydrogen bond is in direct proportion to the content of nitrogen in coal molecules. It can be seen from the semi-quantitative structural parameters that with the increase in coal rank, the aromatic carbon ratio fa, aromatic degree AR and condensation degree DOC increase gradually. With the increase in coal rank, A(CH2)/A(CH3) first decreases and then increases, hydrocarbon generation potential ‘A’ first increases and then decreases, maturity ‘C’ first decreases rapidly and then decreases slowly, and factor D gradually decreases. This paper is valuable for analyzing the occurrence form of functional groups in different coal ranks and clarifying the evolution process of structure in China.

22 November 2021 in Metals
Verified
Journal Article
Open access
PDF file
Peihu GaoPeihu Gao
Peihu Gao
RFRui-Tao Fu
Rui-Tao Fu
BCBai-Yang Chen
Bai-Yang Chen
SZSheng-Cong Zeng
Sheng-Cong Zeng
BZBo Zhang
Bo Zhang
DZDan Zhao
Dan Zhao
High entropy alloy attracts great attention for its high thermal stability and corrosion resistance. A CoCrFeNiMn high-entropy alloy coating was deposited on grey cast iron through plasma transfer arc cladding. It formed fine acicular martensite near the grey cast iron, with columnar grains perpendicular to the interface between the grey cast iron substrate and the cladding layer as well as dendrite in the middle part of the coatings. Simple FCC solid solutions present in the coatings which were similar to the powder’s structure. The coating had a microhardness of 300 ± 21.5 HV0.2 when the cladding current was 80 A for the solid solution strengthening. The HEA coating had the highest corrosion potential of −0.253 V when the plasma current was 60 A, which was much higher than the grey cast iron’s corrosion potential of −0.708 V. Meanwhile, the coating had a much lower corrosion current density of 9.075 × 10−7 mA/cm2 than the grey cast iron’s 2.4825 × 10−6 mA/cm2, which reflected that the CoCrFeNiMn HEA coating had much better corrosion resistance and lower corrosion rate than the grey cast iron for single FCC solid solution phase and a relatively higher concentration of Cr in the grain boundaries than in the grains and this could lead to corrosion protection effects.

6 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
Peihu GaoPeihu Gao
Peihu Gao
SZSheng-Cong Zeng
Sheng-Cong Zeng
CJCan Jin
Can Jin
BZBo Zhang
Bo Zhang
BCBai-Yang Chen
Bai-Yang Chen
DZDan Zhao
Dan Zhao
Gd and Yb elements have high chemical stability, which can stabilize the solid solution in ZrO2. Gd2O3 and Yb2O3 have high melting points, and good oxidation resistance in extreme environments, stable chemical properties. Therefore, Gd2O3 and Yb2O3 were added to ZrO2 to stabilize oxides, improve the high temperature stability, and effectively decrease the thermal conductivity at high temperature. In this work, 5 wt% Yb2O3 and 5 wt%, 10 wt%, 15 wt% Gd2O3 were doped into 8 wt% Y2O3 stabilized ZrO2 (8YSZ) powders as thermal barrier coating materials, and sintered at 1650 °C for 6 h, 12 h, 24 h. The effects of Gd2O3 addition on the microstructure, density, thermal conductivity, hardness, and fracture toughness of Gd2O3-Yb2O3-Y2O3-ZrO2 (GYYZO) bulk composite ceramics were investigated. It was found that the densification of the 8YSZ bulk and GYYZO bulk with 15 wt% Gd2O3 reached 96.89% and 96.22% sintered at 1650 °C for 24 h. With the increase of Gd2O3 addition, the hardness, elastic modulus and fracture toughness of the GYYZO bulk increased and the thermal conductivity and thermal expansion coefficient of the GYYZO bulk decreased. GYYZO bulk with 15 wt% Gd2O3 sintered at 1650 °C for 24h had the highest hardness, elastic modulus and fracture toughness of 15.61 GPa, 306.88 GPa, 7.822 MPa·m0.5, and the lowest thermal conductivity and thermal expansion coefficient of 1.04 W/(m·k) and 7.89 × 10−6/°C at 1100 °C, respectively. The addition of Gd2O3 into YSZ could not only effectively reduce the thermal conductivity but also improve the mechanical properties, which would improve the thermal barrier coatings’ performances further.

13 February 2022 in Coatings
Verified
Journal Article
Open access
PDF file
BCBaiyang Chen
Baiyang Chen
Peihu GaoPeihu Gao
Peihu Gao
BZBo Zhang
Bo Zhang
ZDZhao Daming
Zhao Daming
WWWei Wang
Wei Wang
DZDan Zhao
Dan Zhao
Plasma transfer arc cladding technology has been widely utilized in surface engineering, repairing and remanufacturing. In the present work, multiple cladded thick claddings were prepared on compacted graphite cast iron (CGI) substrates with iron-based powders through plasma transfer arc cladding technology using different plasma arc currents to improve the surface wear resistance. The coatings’ phase and microstructure were analysed through XRD, SEM and EDS. The coatings’ microhardness and wear resistance were characterized. There were pearlite, graphite, austenite and secondary carbides in the iron-based alloy coatings. Due to the heat influence during the multiple cladding process, a spheroidal graphite transition zone appeared between the substrate and the coating. The microhardness of the claddings varied from 363 to 402 HV as the plasma arc current was changed from 45 to 60 A. With the increase of plasma arc current, the cladding’s microhardness increased. The iron-based coating’s minimum friction coefficient and wear mass loss were about 0.48 and 4.2 mg, respectively, when the plasma arc current was 60 A, which are lower values than those of the compacted graphite iron substrate with the friction coefficient and wear mass loss of 0.55 and 8.2 mg. Compared with the substrate, the iron-based alloy claddings achieved the effect of reducing friction and wear resistance simultaneously, which resulted from the self-lubricating effect of graphite and high wear-resistance of carbides in the claddings. The iron-based coatings had a similar abrasive wear mechanism to the CGI, which should be helpful to repair or remanufacture CGI workpieces.

4 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
Peihu GaoPeihu Gao
Peihu Gao
CJCan Jin
Can Jin
SZSheng-Cong Zeng
Sheng-Cong Zeng
RXRui-Guang Xie
Rui-Guang Xie
BZBo Zhang
Bo Zhang
DZDan Zhao
Dan Zhao
In this work, Gd2O3 bulks were sintered at temperatures ranging from 1400 °C to 1600 °C for times from 6 h to 24 h, and their microstructure and properties were studied for a wider application of materials in thermal barrier coatings. The densification of the Gd2O3 bulk reached 96.16% when it was sintered at 1600 °C for 24 h. The elastic modulus, hardness, fracture toughness and thermal conductivity of the bulks all increased with the rise in sintering temperature and extension of sintering time, while the coefficient of thermal expansion decreased. When the Gd2O3 bulk was sintered at 1600 °C for 24 h, it had the greatest elastic modulus, hardness, fracture toughness and thermal conductivity of 201.15 GPa, 9.13 GPa, 15.03 MPa·m0.5 and 2.75 W/(m·k) (at 1100 °C), respectively, as well as the smallest thermal expansion coefficients of 6.69 × 10−6/°C (at 1100 °C).

29 September 2021 in Coatings
Verified
Journal Article
Open access
PDF file
Peihu GaoPeihu Gao
Peihu Gao
SZSheng-Cong Zeng
Sheng-Cong Zeng
CJCan Jin
Can Jin
BZBo Zhang
Bo Zhang
BCBai-Yang Chen
Bai-Yang Chen
DZDan Zhao
Dan Zhao
Thermal barrier coatings with multi-sized porous structure at micro and nano scales were prepared with hollow spherical YSZ powders and polypropylene powders through atmospheric plasma spraying. The thermal conductivities of the multi-sized thermal barrier coatings after a long-term serving at high temperature were tested through laser flash heating method. Meanwhile, the physical models of thermal barrier coatings with multi-sized porous structure at micro and nano scales were constructed through Ansys Workbench. The evolutions of thermal conductivity of thermal barrier coatings with multi-sized pores after long-term service at 1100 °C were investigated through computation. It was found that the thermal conductivity of the coating increased with the extension of the serving time. When the serving time reached 60 days, the thermal conductivity of the coating tended to be stable and close to the compacted bulk. The computational results were consistent with the tested ones, which could be helpful to explain the thermal conducting evolution in thermal barrier coatings with multi-sized porous structure at nano and micro scales after long-term serving at high temperature.