High-bandgap mixed-halide hybrid perovskites have higher open-circuit voltage deficits and lower carrier diffusion lengths than their lower-bandgap counterparts. We have developed a ligand-assisted crystallization (LAC) technique that introduces additives in situ during the solvent wash and developed a new method to dynamically measure the absolute intensity steady-state photoluminescence and the mean carrier diffusion length simultaneously. The measurements reveal four distinct regimes of material changes and show that photoluminescence brightening often coincides with losses in carrier transport, such as in degradation or phase segregation. Further, the measurements enabled optimization of LAC on the 1.75 eV bandgap FA0.83Cs0.17Pb(I0.66Br0.34)3, resulting in an enhancement of the photoluminescence quantum yield (PLQY) of over an order of magnitude, an increase of 80 meV in the quasi-Fermi level splitting (to 1.29 eV), an increase in diffusion length by a factor of 3.5 (to over 1 μm), and enhanced open-circuit voltage and short-circuit current from photovoltaics fabricated from the LAC-treated films.
The practicality and economic viability of hybrid perovskite (HP) solar cells hinges on their operational lifetime, and methods to forecast the performance of perovskites under different operational stresses are greatly needed. Here, we explore the evolution of material-level optoelectronic properties as MAPbI3 degrades and discover universal behaviors where the carrier diffusion length (LD) decays before quasi-Fermi level splitting (∆EF), regardless of specific stress protocol (oxygen, humidity, thermal stress, or combination). We employ a machine learning greedy feature selection model that uses initially measured properties to predict the time it takes LD to fall to 85% of its initial value with prediction accuracy of 12.8%. This model reveals a strong correlation between the initial rate of transmittance change and the time until loss of transport. We translate this material-level finding to photovoltaic device-level forecasting by demonstrating that the rate of change of transmittance is equivalent to the rate of change of the spatial standard deviation of dark-field (DF) image intensity (i.e. scattered light intensity) collected in reflection mode (and thus applicable to devices with opaque contacts). This work demonstrates that transmittance and scattering methods are highly effective for accelerated material (and device) stability evaluation and forecasting.