1 March 2024 in Physics of Fluids
Modeling thermal multiphase flows has become a widely sought methodology due to its scientific relevance and broad industrial applications. Much progress has been achieved using different approaches, and the lattice Boltzmann method is one of the most popular methods for modeling liquid–vapor phase change. In this paper, we present a novel thermal lattice Boltzmann model for accurately simulating liquid–vapor phase change. The proposed model is built based on the equivalent variant of the temperature governing equation derived from the entropy balance law, in which the heat capacitance is absorbed into transient and convective terms. Then a modified equilibrium distribution function and a proper source term are elaborately designed in order to recover the targeting equation in the incompressible limit. The most striking feature of the present model is that the calculations of the Laplacian term of temperature, the gradient term of temperature, and the gradient term of density can be simultaneously avoided, which makes the formulation of the present model is more concise in contrast to all existing lattice Boltzmann models. Several benchmark examples, including droplet evaporation in open space, droplet evaporation on a heated wall, and nucleate boiling phenomenon, are carried out to assess numerical performance of the present model. It is found that the present model effectively improves the numerical accuracy in solving the interfacial behavior of liquid–vapor phase change within the lattice Boltzmann method framework.
7 June 2022 in International Journal of Multiphase Flow
1 March 2024 in Physics of Fluids
We numerically investigate the formation and ordering of staggered oblate particle pairs in three-dimensional straight ducts with a square cross section. The lattice Boltzmann method is employed to simulate rigid particle pairs in a Newtonian liquid. The effects of initial axial spacing, Reynolds number, blockage ratio, and particle aspect ratio on the formation process, migration behavior, and interparticle spacing are explored in detail. Current results indicate that the process from initial to final steady state can be divided into two stages. The first stage is rapid migration from initial positions toward equilibrium positions under shear-induced lift force and wall-induced repulsive force. The second stage is the slow self-assembly of stable particle pairs in the axial direction due to the interparticle interaction. Interestingly, initial axial spacing significantly affects the formation process of particle pairs but does not affect the final steady state. It is found that the equilibrium positions of staggered particle pairs move slightly toward the duct walls, and the axial spacing increases with increasing Reynolds number or particle aspect ratio, or decreasing blockage ratio. For a staggered particle pair, the second particle will occupy the eddy center induced by the first focusing particle. Based on the existing data, a correlation is put forward to predict the axial interparticle spacing of staggered oblate particle pairs in duct flows. The present results may give insights into manipulating and comprehending non-spherical particle dynamics in microfluidic applications.
3 July 2025 in Journal of Fluid Mechanics
We investigate the dynamics of circular self-propelled particles in channel flow, modelled as squirmers using a two-dimensional lattice Boltzmann method. The simulations explore a wide range of parameters, including channel Reynolds numbers ( $\textit{Re}_c$ ), squirmer Reynolds numbers ( $\textit{Re}_s$ ) and squirmer-type factors ( $\beta$ ). For a single squirmer, four motion regimes are identified: oscillatory motion confined to one side of the channel, oscillatory crossing of the channel centreline, stabilisation at a lateral equilibrium position with the squirmer tilted and stable upstream swimming near the channel centreline. For two squirmers, interactions produce not only these four corresponding regimes but also three additional ones: continuous collisions with repeated position exchanges, progressive separation and drifting apart and, most notably, the formation of a stable wedge-like conformation (regime D). A key finding is the emergence of regime D, which predominantly occurs for weak pullers ( $\beta = 1$ ) and at moderate to high $\textit{Re}_c$ values. Hydrodynamic interactions align the squirmers with streamline bifurcations near the channel centreline, enabling stability despite transient oscillations. Additionally, the channel blockage ratio critically affects the range of $\textit{Re}_s$ values over which this regime occurs, highlighting the influence of geometric confinement. This study extends the understanding of squirmer dynamics, revealing how hydrodynamic interactions drive collective behaviours. The findings also offer insights into the design of self-propelled particles for biomedical applications and contribute to the theoretical framework for active matter systems. Future work will investigate three-dimensional effects and the stability conditions for spherical squirmers forming stable wedge-like conformations, further generalising these results.
16 May 2026 in International Journal of Modern Physics C
1 February 2026 in Physics of Fluids
In this paper, a staggered spheroidal particle pair inside a three-dimensional duct Poiseuille flow with Reynolds number (Re) up to 120 is investigated via the lattice Boltzmann method. Validation tests show excellent agreement with numerical and experimental results obtained by other groups. The entire migration dynamics and the final equilibrium state of the oblate and prolate particle pairs are analyzed and compared to those of the spherical particle pairs. The effects of initial axial spacing, particle aspect ratio, and Re are explored herein. Simulation results indicate that spheroidal particles tend to distribute orderly in the streamwise direction after they reach the corresponding face equilibrium positions. A key finding is that the prolate particle pairs eventually tumble with periodic oscillating axial spacing. Present results reveal that the initial axial spacing does not influence the equilibrium positions and interparticle spacings of spheroidal particle pairs. However, it does affect the migration process from the initial to the final stable or dynamic stable state. As Re increases from 20 to 120, spheroidal particles in the staggered pair gradually migrate toward the lower and upper walls, and the dimensionless average axial spacing between the adjacent prolate particles increases from 3.49 to 5.05 and collapses onto a single curve as a linear function of the particle Re. Compared to the oblate particle pair, the prolate particles are closer to the duct wall, and the corresponding axial spacing is larger at the same Re. For a staggered spheroidal particle pair, particles reach the equilibrium state under the attractive and repulsive forces. A second spheroidal particle prefers to occupy the eddy center generated by the first focusing particle. For the prolate particles with the tumbling mode, the distance between the particle and the eddy center gradually changes, and the axial spacing of the prolate particle pair also fluctuates periodically.