The measurement accuracy of fiber optic current sensors (FOCS) is closely related to the stability of Verdet constant and the polarization characteristic of the sensing coils, which are easily influenced by environmental disturbance. In this paper, a self-compensative fiber optic current sensor (SFOCS) with two sensing heads made of single mode fibers is designed and demonstrated. Utilizing sensing and compensative unit as well as a close-loop system, variation of Verdet constant and birefringence is compensated. We numerically calculate the output signal of SFOCS with temperature varying from —30°C to 75°C and simulate the situation where SFOCS is affected by the circular and linear birefringence from the environment, and the results confirm that well designed SFOCS is completely temperature-and vibration-independent. Additionally, in order to achieve the ideal compensation, H function of SFOCS related to birefringence and the current to be measured is introduced and deeply studied. Moreover, we discuss the measurement errors of SFOCS caused by the difference between two sensing heads such as the coupling ratio, the linear and circular birefringence, and we calculate the acceptable error range, within which SFOCS can meet the class 0.2 standard.
The rapid development of neural networks has led to tremendous applications in image segmentation, speech recognition, and medical image diagnosis, etc. Among various hardware implementations of neural networks, silicon photonics is considered one of the most promising approaches due to its CMOS compatibility, accessible integration platforms, mature fabrication techniques, and abundant optical components. In addition, neuromorphic computing based on silicon photonics can provide massively parallel processing and high-speed operations with low power consumption, thus enabling further exploration of neural networks. Here, we focused on the development of neuromorphic computing based on silicon photonics, introducing this field from the perspective of electronic–photonic co-design and presenting the architecture and algorithm theory. Finally, we discussed the prospects and challenges of neuromorphic silicon photonics.
An all fiber optic current sensor (AFOCS) utilizing ordinary optical fiber is proposed and demonstrated, which is implemented with a phase-shift fiber loop ringdown (PS-FLRD) structure. The current-induced rotation angle is converted into a minute change in transmittance of the fiber loop, which can be obtained by measuring the phase shift. The current sensitivity is improved by allowing optical signals to traverse the sensing fiber repeatedly. The relationship between the current sensitivity, intrinsic phase shift, and initial transmittance of the fiber loop is numerically analyzed, and the tunable sensitivity is experimentally verified by adjusting the modulation frequency. An optimal current sensitivity of 0.8158°/A is experimentally obtained for the proposed sensor, and the minimum detectable current is at least 100 mA. The proposed sensor requires fewer polarization elements compared with the common type of fiber optic current sensor (FOCS) and has the characteristics of simple structure, high sensitivity, and ease of operation; it will be a promising approach in practical applications.
A microwave photonics interrogation system for multiplexing fiber Fabry–Perot (FP) sensors is demonstrated in this paper. Different from previous FP demodulation schemes, this system aims at quasi-distributed sensing networks composed of FP sensors with a short effective cavity length less than 1 mm. With the help of a dispersion element, the superimposed reflected spectrum from FP sensors based on a hollow core fiber (HCF) can be converted into separate response passbands in the frequency domain simultaneously, whose center frequency will shift linearly with the variations of environment. The experimental results exhibit high linearity and interrogation ability for both the all-FP multiplexing system and hybrid multiplexing system. A strain interrogation sensitivity of 0.938 kHz/µɛ and temperature sensitivity of −0.699 MHz/°C have been realized, corresponding to a FP cavity length demodulation sensitivity of 1.563 MHz/µm. Furthermore, numerical studies about the impacts of the HCF-FP spectrum envelope on the RF response passband, as well as the theoretical minimum detectable cavity length and multiplexing capacity of the system, are also carried out.
The explosive development of the big data era has driven the rapid growth of silicon photonics, and logic operators based on photonic circuits have also been intensively investigated. Photonic integrated logic operators possess a high degree of design freedom and novel prospects, and they are regarded as promising platforms for future signaling and data processing. In this work, considering all-optical logic operation with lower power consumption and a smaller device footprint, multifunctional all-optical logic gates based on silicon photonic crystal (PhC) waveguides and phase-encoded light beams are proposed and applied to realize several logic operators, including XNOR, XOR, NOR, AND gates as well as a half adder and half subtractor. The initial phases ( and 0) of incident light represent the input digital states (1 and 0), and the logic operation results are determined by the output light intensity. Also, simulations are carried out to verify the proposed concept and to investigate the rise time, fall time, and cross talk of the devices. Theoretically, the bit rate for the proposed device can reach 1.25 Tb/s, and the proposed structures have the potential to be extremely compact due to PhC waveguides.