An all fiber optic current sensor (AFOCS) utilizing ordinary optical fiber is proposed and demonstrated, which is implemented with a phase-shift fiber loop ringdown (PS-FLRD) structure. The current-induced rotation angle is converted into a minute change in transmittance of the fiber loop, which can be obtained by measuring the phase shift. The current sensitivity is improved by allowing optical signals to traverse the sensing fiber repeatedly. The relationship between the current sensitivity, intrinsic phase shift, and initial transmittance of the fiber loop is numerically analyzed, and the tunable sensitivity is experimentally verified by adjusting the modulation frequency. An optimal current sensitivity of 0.8158°/A is experimentally obtained for the proposed sensor, and the minimum detectable current is at least 100 mA. The proposed sensor requires fewer polarization elements compared with the common type of fiber optic current sensor (FOCS) and has the characteristics of simple structure, high sensitivity, and ease of operation; it will be a promising approach in practical applications.
This article reports a highly sensitive fiber Bragg grating (FBG) temperature sensor system based on microwave-photonic interrogation and the enhanced Vernier effect. A low-coherent system-based microwave-photonic three-beam interferometer is constructed using three parallel-arranged FBGs with different Bragg wavelengths and different lead-in fiber lengths. One FBG is used as the sensing device, and the other two are considered as the reference device. Changes in the Bragg wavelength difference between the sensing FBG and the reference FBGs induced by temperature variations are encoded into spectral shifts of the Vernier envelope in the magnitude spectrum of the system in the microwave domain. By carefully designing the Bragg wavelength differences and the lead-in fiber length differences, the enhanced Vernier effect can be realized. A remarkable temperature sensitivity of −40.89 MHz/°C is successfully demonstrated based on the three-FBG sensor system based on the enhanced Vernier effect.
10 September 2024 in Journal of Lightwave Technology
Tilted fiber Bragg gratings (TFBGs) have garnered substantial research attention and have found widespread applications for sensing a diverse array of physical, chemical, and biological parameters based on optical spectrum measurements. The interrogation of a TFBG sensor typically requires a high-resolution bulky optical spectrum analyzer (OSA) due to the extremely narrow dips caused by the resonance of cladding modes. However, high-resolution OSAs can be costly and have limitations on measuring speed, limiting their practicality. In this paper, a new approach to interrogating TFBG sensors is proposed and experimentally demonstrated based on a microwave photonics technique. Instead of measuring the optical transmission spectrum, the frequency response of the TFBG sensor is acquired using a vector network analyzer. Followed by time domain analysis, sensing information embedded in the transmission spectra of the TFBG sensor subject to external perturbations is successfully extracted. Monitoring of variations in temperature, strain, and liquid level is experimentally demonstrated, and the potential for multi-parameter discrimination is also discussed. The introduced technique is easy to implement and the corresponding characteristic sensing signal is easy to demodulate, offering a promising solution for TFBG-based sensor systems.