Measuring thermal stability in magnetic random access memory devices is non-trivial. Recently, there has been much discussion on the appropriate model to use: single domain or domain wall nucleation. Of particular challenge is assessing the maximum size at which the single domain model can be assumed. Typically, this is estimated to be in the range of 20–30 nm based on a value of the exchange stiffness ( ) that is assumed, estimated using indirect measurements or derived from significantly thicker films. In this work, it is proposed that this maximum size can be measured directly via the “activation volume” ( ) or the “activation diameter” ( ), which originates from the concept of magnetic viscosity. This is conducted by measuring, using the time dependence of magnetization at different applied fields, in perpendicular magnetic tunnel junction pillars of varying effective anisotropy constant ( ) and diameter. It is shown that the trend in follows dependence, in good agreement with the analytic model for the critical diameter of coherent switching. Critically, it is also found that the smallest size for which a single domain, with coherent reversal, occurs is 20 nm. Thus, in devices with technologically relevant values of , the macrospin model may only be used in 20 nm, or smaller, devices.
Defect generation during time-dependent dielectric breakdown stress is investigated by a multi-energy level agnostic model. Monte Carlo simulations show that the characteristic power-law increase of the generated defects with stress time is readily obtained when considering distributed bond strengths. DC and AC unipolar simulations show the proportionality between the time-to-breakdown and the fluence and energy of the injected carriers. These results are consistent with the experimental observations of a fluence and energy-driven process in thin oxides.
We present micromagnetic simulations and experiments on voltage-assisted field switching in perpendicular magnetic tunnel junctions (MTJs) with a synthetic antiferromagnetic (SAF) free layer, where the magnetic state of one sublayer is detected via tunneling magnetoresistance (TMR). Simulations reveal that local modulation of perpendicular magnetic anisotropy in one SAF sublayer leads to distinct switching characteristics. The switching field varies linearly with the anisotropy field, indicating voltage-controlled magnetic anisotropy (VCMA)-dominated dynamics similar to single free-layer devices. We then experimentally study the magnetic switching field of MTJ devices with SAF free layers under applied gate voltage. By varying the MgO tunnel barrier thickness to systematically modulate the resistance-area (RA) product, we enable quantitative separation of spin-transfer torque (STT), VCMA, and Joule heating contributions. Our findings indicate that VCMA dominates in devices with a high-RA product, while low-RA devices exhibit nonlinear switching behavior due to enhanced contributions from STT and Joule heating. Furthermore, the effective fields derived from STT, VCMA, and Joule heating contributions under various gate voltages show minimal dependence on device critical dimensions, indicating favorable scaling behavior. This work presents a unified framework analyzing the roles of STT, VCMA, and Joule heating in SAF-based voltage-gated spin–orbit torque (SOT) magnetic random-access memory (MRAM), offering key insights for the optimization of performance, energy efficiency, and scalability in SOT-MRAM technologies.