1 November 2012 in Journal of Magnetism and Magnetic Materials
30 September 2013 in Physical Review B
The magnetization dynamics of coupled and uncoupled spin valves with the structure $\mathrm{NiFe}\phantom{\rule{0.28em}{0ex}}(20\phantom{\rule{0.28em}{0ex}}\mathrm{nm})/\mathrm{Cu}({t}_{\mathrm{Cu}})/\mathrm{NiFe}\phantom{\rule{0.28em}{0ex}}(20\phantom{\rule{0.28em}{0ex}}\mathrm{nm})/\mathrm{IrMn}\phantom{\rule{0.28em}{0ex}}(10\phantom{\rule{0.28em}{0ex}}\mathrm{nm})$ is probed by broadband ferromagnetic resonance absorption measurements. The coupling intensity between the free and the pinned layers is tailored by varying the Cu thickness ${t}_{\mathrm{Cu}}$. Broadband spectra exhibited two resonant modes for each value of the applied field. It is observed that the coupling between NiFe layers modifies the amplitude of the absorption peaks and the shape of the dispersion relations for each mode, which becomes particularly distorted in the antiparallel magnetization state. The observed phenomena are well described by applying a semianalytical model that properly takes into account the coupling interactions and allows an efficient numerical calculation of the absorption peak amplitudes and the dispersion-relation shapes.
1 August 2012 in Journal of Applied Physics
Heusler Ni59.0Mn23.5In17.5 alloy was prepared as the metallic core of a glass-coated microwire with a total diameter of 41.8 μm. X-ray diffractograms performed at room temperature and 100 K show a highly ordered L21 cubic structure characteristic of the austenitic phase in Heusler alloys. Thermomagnetic curves measured in the temperature range from 50 K up to 400 K show ferromagnetic coupling in the austenite with the Curie temperature around 246 K. Hysteresis loops measured at different temperatures indicate a soft ferromagnetic behaviour, confirming the microwire axis as the magnetization easy direction. The magnetic entropy variation reaches a maximum value of 1.75 J/kgK at the ferro-to-paramagnetic phase transition for a magnetic field change of 30 kOe. After short annealing, the Curie temperature is almost unchanged while the maximum entropy change increases up to 2.01 J/kgK. Refrigerant capacity and its dependence on both working temperature range and applied field value are evaluated for all microwire samples, reaching 120 J/kg for a 30 kOe magnetic field variation. We analyze the possibility of employing microwire shape Heusler alloys as low field magnetocaloric micro-devices and solid-state actuators.
6 February 2008 in Journal of Applied Physics
Two series of self-organized hexagonal arrays of uniaxial Permalloy nanowires are grown by electroplating, filling of nanopores in anodic alumina films. Nanowires with periodicities of 65 and 105nm and wire diameter of 25–60nm were investigated by magnetization and ferromagnetic resonance (FMR) measurements. The length of the wires is 2.5μm, the volume ratio 0.13⩽v⩽0.43. A crossover transition from a one-dimensional easy axis “wire” behavior of weakly interacting uniaxial nanowires to a two-dimensional behavior of strongly coupled “wire film” having an easy plane anisotropy is determined from FMR measurements. The crossover occurs at v=0.27 for 105nm periodicity, and v=0.43 for 65nm periodicity. The system of the thinnest nanowires corresponds to a statistical ensemble of weakly interacting uniaxial particles, characterized by the highest coercivity of 1276Oe, the highest switching field distribution, and highest FMR linewidth, resulting from the broad distribution of individual wires. The coercivity monotonously decreases to 440Oe with increasing nanowire radius and volume fraction, as the wire shape anisotropy is reduced and the array anisotropy takes over due to dipolar interwire interaction, smoothing out the individuality of the wires. The behavior of coercivity, switching field distribution, and FMR linewidth is in accordance with the increase of the coupling of the nanowires.
26 September 2012 in Physical Review B
The magnetocaloric effect (MCE) in one-dimensional (1D) magnetic nanostructures is optimized for a specific value of the magnetic field H* when applied perpendicularly to the longitudinal direction of the system. Our results reveal that H* corresponds to the saturation field, slightly above the transition from a magnetically stable dipolar-coupled configuration to an unstable one. This MCE-optimizing field explicitly depends on the characteristic magnetic parameters of the system, namely, saturation magnetization (MS) and anisotropy constant (K): H* is directly proportional to MS2, and the anisotropy contribution is equal to the anisotropy field of the particles HA=2K/MS. Accordingly, the MCE in 1D nanomagnets can be directly tuned by a proper choice of the characteristic MS and K values of the materials.
1 June 2015 in Journal of Magnetism and Magnetic Materials