22 August 2020 in Agricultural science Euro-North-East
Manganese belongs to the group of heavy metals, which at high concentrations can have a negative effect on plant development. Typical soils of the Kirov region are acid podzolic and sod-podzolic soils, which are characterized by high content of manganese compounds available for plants. Studied was the effect of manganese(II) ions at the concentrations of 30.0, 60.0 and 90.0 mg/l on the growth and antioxidant activity (AOA) of the superoxide dismutase enzyme (SOD) in the organs of 7 and 14-day-old barley plants grown in aquatic culture. Varieties and forms of barley 346-09, 29-11, Farmer 198-12, Forward and Bionik, resistant to acidic soils (Al3 +, H+) served as objects for the research; Belgorodskij 100 variety was used as standard. When manganese was added to the solution for growing, a decrease in root length and an increase in AOA of SOD in plant roots were noted. It was concluded that increased concentrations of manganese had an effect on the morphometric parameters and on AOA SOD of barley seedlings. It has been established that increasing the dose of manganese in the solution for growing leads to a decrease in the length of the roots. AOA SOD varied in different organs of plants of some varieties, and its more significant change in the experiment compared with the control was revealed in the roots. Judging by morphometric indicators, the Belgorodskij 100 variety was the least resistant to Mn2+ ionic toxicity, the root length of which in the control was 15.7±0.4 cm, and in the experiment 13.2±0.3; 12.2±0.1; 11.5±0.3 cm in accordance with the dose of manganese 30, 60 and 90 mg / l. According to the level of AOA SOD, the most sensitive variety was Farmer 198-12, its change of AOA SOD in the roots (% of control) was 158.8; 167.2 and 169.4% in accordance with the dose of manganese 30.0; 60.0 and 90.0 mg / l (AOA SOD in the control was 52.4±0.4%; in the experiment 83.2±2.2; 87.6±2.0 and 88.7±0.6, respectively), and in the shoots ˗ 121.0; 128.3 and 125.6 %, respectively (66.7±7.9 % in the control and 80.7±0.5; 85.6±1.4; 83.8±0.6 % in the experiment in accordance with the dose of Mn 2+).
29 September 2023 in Engineering Technologies and Systems
The review of literature sources has shown that at the moment there are no reliable methods, which theoretically determine the main parameters of axial devices for threshing grass seeds and it is necessary to conduct researches to establish a mathematical relationship between these parameters and quality indicators.
10 June 2022 in Chemistry of plant raw material
OSOlʹga Aleksandrovna Simonova
Olʹga Aleksandrovna Simonova
Известно, что все тяжелые металлы (ТМ), в том числе железо, оказывают влияние на развитие сельскохозяйственных культур. Это воздействие отражается как на морфометрических параметрах растений, так и на физиологических процессах, протекающих в них. Ответные реакции на воздействие неблагоприятных факторов могут отличаться не только у разных видов растений, но и у разных сортов. В данной работе представлены результаты исследования содержания хлорофиллов a и b в листьях растений ячменя разных сортов при добавлении в среду выращивания избыточных доз ионов железа (II). В результате исследования выявлено, что Fe2+ оказывает разное влияние на содержание зеленых пигментов и их соотношение в листьях исследованных сортов ячменя. При этом некоторые сорта по определяемым параметрам оказались более устойчивыми к избытку ионов железа (II) по сравнению с другими. В целом содержание хлорофилла a в листьях исследованных сортов ячменя в контрольном варианте колебалось от 17.45 (Белгородский 100) до 22.16 мг/г (29–11); хлорофилла b – от 9.30 (Бионик) до 12.95 мг/г (29–11). Поскольку процессы фотосинтеза связаны с образованием в растениях белков, жиров и углеводов, данное исследование послужит дальнейшей базой для исследования взаимосвязи между нарушениями процессов фотосинтеза в сельскохозяйственных культурах и образованием в них органических веществ.
27 February 2026 in Agricultural science Euro-North-East
Proposed a design for a sod seeder furrow opener equipped with cutters and a damper-safety device (RF Patent No. 2814067) which effectively smooths out shock loads on the drive when the cutter blades enter the soil and switches it off when the cutter blades encounter obstacles. The purpose of the research was to evaluate the efficiency of the milling furrow opener with damper devices and to preliminarily determine the rational parameters and operating modes of the furrow opener dampers. To conduct experiments in a soil channel, a laboratory installation was made in the form of a separate section of a sod seeder furrow opener with a drive from an electric motor. In the course of comparative studies of the serial furrow opener of SDK seeders and the furrower equipped with damper devices, it was revealed that the use of dampers in the design of disc cutters reduces the energy consumption of milling by 16.6–32.3% compared with the operation of the serial working body, with a greater effect noted in the range of rotation frequencies of cutters from 270 to 385 min -1 . In the process of studying the influence of the parameters and operating mode of the dampers of disk cutters on the energy consumption of milling with a furrow opener through the planning of the experiment, it was revealed that the minimum value of the power consumed by the furrow opener equal to 2.55 kW corresponds to the following values of the factors: the rotational frequency of the cutters of 336 min -1 , the total stiffness of the damper springs of 89.4 N/mm, the traveling speed of 0.7 m/s. The research results confirmed the data from computer modeling and revealed a significant reduction in the energy consumption of milling when using dampers in the design of disc cutters of the furrow cutter.