Sustainability necessitates the protection of infrastructure from any kind of deterioration over the life cycle of the asset. Deterioration in the capacity of reinforced concrete (RC) infrastructure (e.g., bridges, buildings, etc.) may result from localised damage sustained during extreme loading scenarios, such as earthquakes, hurricanes or tsunamis. In addition, factors such as the corrosion of rebars or ageing may also deteriorate or degrade the capacity of an RC column, thereby necessitating immediate strengthening to either extend or ensure its design life is not limited. The aim of this paper is to provide a state-of-the-art review of various strengthening and repair methods for RC columns proposed by different researchers in the last two decades. The scope of this review paper is limited to jacketing techniques for strengthening and/or repairing both normal- and high-strength RC columns. The paper also identifies potential research gaps and outlines the future direction of research into the strengthening and repair of RC columns.
This paper presents the results of static and dynamic tests on unreinforced brick masonry wall panels subject to out-of-plane loading. Fourteen wall panels were tested. The test program included static, free-vibration, and dynamic tests using harmonic support, impulse support, and earthquake support motion. The experimental results indicate that displacement, rather than inertia force amplitude, determines whether an unreinforced masonry wall will collapse during inertial (seismic) loading. An empirical force–displacement relationship is proposed that can be used for a substitute structure in a displacement-based method of analysis.