A gate driving for power devices is a key technology to further improve switching characteristics. With the help of digital gate driver IC, the switching behavior of power devices can be enhanced even under high-speed switching. In this paper, an evaluation platform for determining the optimal switching pattern of an active gate drive control is proposed for an inverter circuit. A high speed optimization system is built up to search for an advantageous switching pattern that reduces total switching loss of two power devices in an inverter circuit and constrains surge voltage simultaneously. The proposed online optimization demonstrates its feasibility for the full-bridge inverter circuit, which is rated at 500 V with digital active gate drive control. Experimental results show that the proposed optimization system is able to obtain optimal switching pattern from $64^{60}$ possible combinations of switching patterns within 15 min, which is 6 times faster than the previous study. Optimizations can also conducted under different load current conditions. Eventually, the obtained optimal pattern yields up to 42% reduction in the total switching loss when it constrains surge voltage to minimum compared with the conventional driving pattern.
3 June 2021 in IEEE Transactions on Industrial Electronics
Digital active gate driving has been shown to effectively manage the switching performance for power devices with the adjustable driving waveforms. However, most of the studies are based on a dedicated test circuit rather than a practical inverter with the sinusoidal output current. In fact, it is the dependence on the load current that makes the design of the gate driving profiles a critical issue. To investigate the digital active gate driver in an inverter application, this article has applied optimal patterns adapting to time-varying output load current. Prior to the search of optimal patterns, the proper design of time slot is discussed with three different time resolutions. With the proper resolution determined for patterns, multiple optimizations are carried out for different current conditions. In this way, the search for optimal patterns can be completed in an efficient time. Next, a lookup table of optimal switching pattern in correspondence with each certain load current condition was built in advance. According to the output load current, the optimal pattern is selected based on the lookup table. Compared to conventional constant driving waveform, the power loss has been reduced by 7% with full optimal lookup table applied.
4 November 2021 in IEEE Transactions on Industry Applications
This article proposes a new optimization method and its platform for automatically adjusting the control parameters of a digital active gate driver while operating a pulse-width modulation (PWM) inverter. The proposed optimization method applies the searching parameters for some sectors in an ac current cycle and fixed parameters for the other sectors. This enables us to find the optimal operating points of power devices so as to reduce the surge voltage and switching loss with the consideration of their dependency on the load current. Additionally, the proposed optimization method also can find the operating points while the inverter performs a continuous switching operation. For this reason, the proposed optimization method can be applied to a continuous running test of PWM inverters, for example, in a manufacturing process. The validity of the proposed method and platform was evaluated by using a 10-kW three-phase PWM inverter with digital gate drives. The experimental results confirmed that the proposed optimization method makes it possible to find the optimal operating points for reducing the surge voltage and/or the power loss.
29 June 2021 in IEEE Transactions on Industry Applications
This article proposes to apply an improved modulation based on a discontinuous current mode (DCM) to grid-tied inverters for efficiency improvement. The losses caused by the parasitic capacitance of the devices can be nonnegligible in MHz-operated converters even with Gallium Nitride high-electron-mobility transistors (GaN-HEMTs). The proposed off-time discrete control can achieve ZVS by discretely adjusting the oscillation period. This article reviews the principles of the proposed modulation, and the mechanism of the losses caused by the parasitic capacitance of semiconductor devices and printed circuit board. This article also reports some experimental verification with a 400-W fabricated converter, which consists of GaN-HEMT devices and is operated at 1 MHz. The loss reduction by the proposed off-time discrete control was verified in the experiments, and it was confirmed that the experimentally measured loss reduction agreed with the estimated loss reduction based on the model and device characteristics.
22 June 2018 in IEEE Transactions on Industry Applications
This paper proposes a new control method suitable for active power filters to reduce the dc capacitor voltage ripples associated with the third-order harmonic current compensation. The proposed method superimposes a negative-sequence fundamental current on the compensating current to cancel out the active power ripple caused by the third-order harmonic current. As a result, the proposed method has the capability to eliminate the dc capacitor voltage ripple at double the source frequency. Experimental results obtained by a 10-kW three-phase diode rectifier verify the validity of the proposed method. The proposed method exhibits a good suppression performance of the dc capacitor voltage ripple at double the source frequency.
This paper proposes an active gate control method for switching waveform shaping irrespective of circuit stray inductance and an evaluating system based on a practical full-bridge inverter equipped with digital gate drivers. The main circuit of the proposed system has 1700-V, 150-A IGBT power modules in a practical circuit layout resulting in large stray inductances. The proposed system has a capability of optimizing driving patterns for shaping the designed switching waveform. In experimental verification, active gate control can suppress the surge voltage from higher than 60% to 6% with a fast switching speed in three different circuit layout of the proposed practical 50-kVA full-bridge inverter. As a result, this paper reveals that active gate control achieves reduction in effect of stray inductance and increases a freedom of the circuit layout in power converters.