1 December 2015 in Journal of Performance of Constructed Facilities
As the most important feature of jacked open-ended concrete pipe piles, shear zone has fluence of crucial importance during installing and after penetration. This study conducted a field test in silt deposit to observe the physical phenomenon of shear zone after installation and investigated soil parameter differences from undisturbed soil through laboratory tests. Direct observation on shear zone reveals that the boundary between shear zone and in situ soil is evident. The average soil thickness in the shear zone falls between 6 and 30 mm, which are closely related to natural water content and void ratio in different layers. Laboratory tests on the shear zone show evident compaction during installation, and the soil parameters in the shear zone are sensitive to the jacking installation procedure. Some soil parameters decrease, whereas others increase because of excess pore water dissipating after installation. The extent of the shear zone is helpful in understanding interface friction on pretensioned high-strength concrete (PHC) piles in clay.
1 January 2019 in Soil Mechanics and Foundation Engineering
1 April 2020 in Stavební obzor - Civil Engineering Journal
In order to explore the relationship between the critical bearing capacity and settlement of closed pile tip pierced into the soil, based on the Boussinesq solution and the Kelvin solution, the analytical solution between the critical bearing capacity and the critical settlement of the closed pile tip is derived by combining the stress distribution function. The analytical solution of critical bearing capacity and settlement of pile tip is verified by field test of static pressure pile penetrating into layered soil with a full-section pressure sensor installed at pile tip. The results show that during the penetration process, the bearing capacity increase stage of the pile tip is divided into linear steepening section and nonlinear slow increasing section. The soil in the linear steep increase section behaves as an elastic state. The bearing capacity of the pile tip before the punctured soil layer is linear with the settlement, and the final value of the linear steep increase section is the elastic limit value and the critical bearing capacity of the piercing pile tip. When the residual pile tip force is not considered, the critical settlement of the pile tip is between 0.095-0.119d; when considering the residual pile tip force, the critical settlement is between 0.091-0.105d. In particular, when the Poisson's ratio is 0.5, the analytical solution of the semi-infinite space is equivalent to the analytical solution of the infinite space.
30 April 2021 in Frontiers in Materials
The piezoresistive silicon pressure transducers based on the piezoresistive effect have demonstrated their potential in the accurate monitoring of pressure. However, their usage in the pore and earth pressure monitoring at the pile surface under hydraulic jacking has not yet been explored. In this study, two self-made model piles (one is a closed-ended pile and the other is an open-ended pile) were instrumented with piezoresistive silicon earth transducers and pore pressure transducers and then driven into the soil using a hydraulic jack. A comprehensive investigation was first carried out for the structure of the model piles, the installation procedure of the transducers, and the composition of the test system. The pore and earth pressure measurements of the transducers were used for the evaluation of the distribution of the pore pressure, excess pore pressure, radial earth pressure, and radial effective earth pressure. The model test results indicate that the piezoresistive silicon pressure transducers are suitable for monitoring the pore and earth pressure at the pile surface during jacking. In addition, the pore pressure, excess pore pressure, radial earth pressure, and effective radial earth pressure along the test piles were affected by the penetration depth and the pile end form.