The dependency on nonbiodegradable-based food packaging, increase in population growth, and persistent environmental problems are some of the driving forces in considering the development of biodegradable food packaging. This effort of green packaging has the potential to solve issues on plastic wastes through the combination of biodegradable composite-based food packaging with plant extracts, nanomaterials, or other types of polymer. Modified biodegradable materials have provided numerous alternatives for producing green packaging with mechanical strength, thermal stability, and barrier performance that are comparable to the conventional food packaging. To the best of our knowledge, the performance of nonbiodegradable and biodegradable composites as food packaging in terms of the above properties has not yet been reviewed. In this context, the capability of biodegradable polymers to substitute the nonbiodegradable polymers was emphasized to enhance the packaging biodegradation while retaining the mechanical strength, thermal stability, barrier properties, and antioxidant and antimicrobial or antibacterial activity. These are the ultimate goal in the food industry. This review will impart useful information on the properties of food packaging developed from different polymers and future outlook toward the development of green food packaging.
It is of significant concern that the buildup of non-biodegradable plastic waste in the environment may result in long-term issues with the environment, the economy and waste management. In this study, low-density polyethylene (LDPE) was compounded with different contents of poly(butylene succinate) (PBS) at 10–50 wt.%, to evaluate the potential of replacing commercial plastics with a biodegradable renewable polymer, PBS for packaging applications. The morphological, mechanical and thermal properties of the LDPE/PBS blends were examined in relation to the effect of polyethylene–graft–maleic anhydride (PE–g–MA) as a compatibilizer. LDPE/PBS/PE–g–MA blends were fabricated via the melt blending method using an internal mixer and then were compression molded into test samples. The presence of LDPE, PBS and PE–g–MA individually in the matrix for each blend presented physical interaction between the constituents, as shown by Fourier-transform infrared spectroscopy (FTIR). The morphology of LDPE/PBS/PE–g–MA blends showed improved compatibility and homogeneity between the LDPE matrix and PBS phase. Compatibilized LDPE/PBS blends showed an improvement in the tensile strength, with 5 phr of compatibilizer providing the optimal content. The thermal stability of LDPE/PBS blends decreased with higher PBS content and the thermal stability of compatibilized blends was higher in contrast to the uncompatibilized blends. Therefore, our research demonstrated that the partial substitution of LDPE with a biodegradable PBS and the incorporation of the PE–g–MA compatibilizer could develop an innovative blend with improved structural, mechanical and thermal properties.