In this work, we studied the light-output properties, efficiency function, as well as the pulse-shape discrimination (PSD) capability of p-Terphenyl scintillator. The selected solid cylindrical scintillation detector has a thickness of 45 mm and a diameter of 45 mm. Recently presented studies of light-output functions have only been measured for low-neutron energies. Our motivation has been to determine the light output function for p-Terphenyl scintillator more accurately over a wider neutron energy range. The measurements have been carried out with mono-energetic neutron beams in the wide energy range from 1.1 to 19 MeV. The neutron–gamma spectrometric system which we developed has been used for the measurement. The input analog signal from the detector was digitized with a fast 12-bits analog to digital converter with a sampling frequency of 1 GHz. Measured data from the detector are processed into the gamma and neutron spectra. The accurate light output function for the p-Therphenyl scintillator has been calculated. The pulse-shape discrimination capability, as well as the detection efficiency, of a p-Terphenyl scintillator are lower in comparison with a NE-213 equivalent detector.
Proportional counters filled with hydrogen are suitable for fast neutron detection and spectrometry. As their sensitivity is not limited only to this type of ionizing radiation as desired, an approach suitable for event discrimination was investigated. Several counters of the given construction were subjected to various radiation fields and the effort was directed to the examination of pulse-shape discrimination method intended to distinguish neutrons from gamma rays and parasitic events (microdischarges) if these also occurred. Rising edge duration of the output pulses and their amplitudes were mapped into diagrams enabling visual discrimination while the criteria for further computational processes are to be determined. Pulse waveforms from charge-sensitive preamplifier with the proportional counters connected were recorded using an FPGA-based custom-build acquisition unit and then post-processed. Moreover, the possibility of operation verification and energy calibration based on the introduction of helium-3 admixture into the gas filling was studied, as well as the energy resolution abilities. Also, the theoretical basis for particle discrimination is presented in the form of description of events and principles involved.