1 January 2023 in Rocznik Ochrona Środowiska
The article's authors analysed the most perspective and widely known methods of neutralising the acidic condensate, which is a by-product of natural gas combustion. Among them, the hydrodynamic cavitation method was the most effective. In this regard, it was proposed to improve this method by using the method of discrete-pulsed energy input, which involves neutralisation due to the degassing process. Based on the mathematical model of the bubble ensemble dynamics, a numerical simulation of the formation and growth of vapour-gas bubbles in the process of cavitation boiling of condensate was carried out. Also, an analytical study of the evolution of the vapour-gas bubble population and changes in the current vapour content of the condensate during its boiling was investigated under different values of the initial size of gas micronuclei. The results of the experimental study also confirmed the effectiveness of this method and showed that almost complete removal of carbonic acid from condensate occurs during the first two minutes of processing. That is evidenced by the increased pH values of condensate, which corresponds to the range of permissible pH values of distilled water. Therefore, the carbonic acid in the condensate is absent. Using this method will significantly reduce the environmental effect and the amount of harmful emissions.
14 December 2020 in Scientific Works
Представлено огляд традиційних і сучасних технологій екстрагування рослинної і тваринної сировини та інноваційних методів інтенсифікації процесів екстракції. Розглянуто три основні фактори які забезпечують інтенсифікацію процесів екстракції, а саме: збільшення питомої поверхні контакту фаз, підтримання високого потенціалу масопереносу, а також прискорення масопереносу через міжфазну поверхню. Серед них найбільш вагомим фактором інтенсифікації є прискорення внутрішнього масопереносу в структурі сировини. На цій лімітуючій стадії відбувається підведення розчинника до цільового компонента і подальша молекулярна дифузія розчиненої речовини через складну капілярно-пористу структуру до поверхні частинки. Показано, що сучасні інноваційні методи, спрямовані саме на заміну молекулярної дифузії в матриці сировини на конвективний масоперенос. Ефективність цих методів базується на ефектах кавітації, які розглядаються як основний фактор інтенсифікацій внутрішнього масопереносу в сировині. Обговорюються основні механізми кавітаційної дії, які сприяють прискорення внутрішнього масопереносу. В статті особливу увага приділено роботі пульсаційних екстракторів, котрі ефективно застосовуються при екстрагуванні з грубо дисперсної сировини. Розглянуто конструкцію і принцип работи пульсаційного диспергатора-екстрактора, в якому для посилення кавітаційної ефектів дії вперше застосовано сопло Вентурі. До найбільш вагомих переваг нової конструкції віднесено можливість скорочення часу екстракції, максимальне вилучення цільових речовин, зменшення питомих енерговитрат та збільшення продуктивності, а також можливість одночасного проведення процесів змішування, екстракції, диспергування, гомогенізації, що дозволить в подальшому його застосування в різних промислових технологіях.
20 December 2024 in Energy Technologies & Resource Saving
This paper presents material related to the comprehensive technology for the utilization of acidic condensate formed at thermal power plants and contains a series of issues related to the processes of neutralization and degassing of the liquid, further carbon dioxide methanation, and water electrolysis. The proposed technology for acidic condensate utilization will address several environmentally oriented issues, including reducing CO2 emissions into the atmosphere, preventing acidic effluents from entering wastewater and natural water bodies, saving water resources, and promoting alternative fuel production. The basis of the technology is a cavitation reactor, which allows almost complete extraction of carbon dioxide gas present in the form of bubbles ranging in size from 5 µm to 0.5 µm. Experimental and theoretical studies of carbon dioxide extraction, the efficiency of liquid neutralization, and the sizes of bubbles that can be activated under the proposed processing regimes for carbon dioxide extraction were conducted to purposefully control the liquid neutralization processes through cavitation mechanisms implemented in the equipment of this technological scheme. The primary idea of the technology was associated with finding ways for effective reagent-free neutralization of condensate by extracting CO2. Treatment of condensate using the proposed technology practically realizes complete extraction of carbon dioxide gas from the liquid contained in bubbles, the concentration of which, according to literature data, ranges from 30 mg/kg to 70 mg/kg in acidic condensate. However, further development of this idea involves using a series of processes that allow avoiding the release of carbon dioxide into the atmosphere after its extraction from the liquid and redirecting this stream to the methanation process for fuel production. Extraction of impurities from the condensate allows obtaining water, which can be used to replenish the water circuit of the boiler or for the water electrolysis process to obtain hydrogen as a raw material for the carbon dioxide methanation process or as an alternative fuel. Bibl. 18, Fig. 5, Tab. 2.
28 February 2020 in SWorld-Ger Conference proceedings
The article briefly analyzes the existing mathematical models of the extrusion processing process of plant materials. Literary evidence suggests that there are very few mathematical models that look at areas where raw materials go into a viscoplastic stat
16 December 2022 in Scientific Works
Проведено аналіз проблем у галузі переробки молочної сироватки. В ході якого встановлено перспективність даного напрямку, сформульовано мету і завдання досліджень. В рамках роботи розглянуто існуюче в Україні і світі обладнання, зокрема, його переваги і недоліки. На основі чого авторами було запропоновано використання роторно-пульсаційного апарата спеціальної конструкції типу ротор-статор-ротор. Проведені дослідження на запропонованому експериментальному обладнанні дозволили вивчити вплив гідродинамічної обробки на процес кристалізації молочної сироватки та досягти покращення перебігу процесу кристалізації лактози в сироватці. Зокрема, в роботі доведено, що обробка сироватки з використанням в комплексі вакуумної камери та роторно-пульсаційного апарата спеціальної конструкції типу ротор-статор-ротор перед стадією кристалізації лактози дозволяє отримувати кристали меншого розміру з вузьким дисперсним розподілом в діапазоні від 5,0 до 6,5мкм, у порівнянні, з традиційними технологіями, де розміри кристалів досягають 20мкм. Запропонована конструкція дозволяє підвищити продуктивність, забезпечити рівномірну обробку потоку рідини, а також збільшити швидкість обертання ротора для більш інтенсивного гідродинамічного впливу на рідину. У підсумку проведеної роботи авторами було рекомендовано використання даного обладнання в технологіях сушіння сироватки молока, з метою отримання продукту високої якості. Рекомендований режим рециркуляції протягом 2 хв. перед стадією кристалізації лактози.
1 January 2026 in Acta Periodica Technologica
The present study investigates the potential for intensifying the extraction of bioactive compounds from chicory roots using the method of discrete-pulse energy input (DPEI) implemented in a cavitation-type pulsed disperser. The objective of the study was to evaluate the effect of hydrodynamic treatment on extraction kinetics, extractive yield, and the microstructure of the obtained extracts. The extraction kinetics was assessed based on the total soluble solids content, while the presence and size of suspended particles in the extracts were analyzed by optical microscopy. The results demonstrated that the most intensive release of extractive compounds occurred during the initial stage of the process, whereas after 40 min of treatment the system approached extraction equilibrium. Optical microscopy revealed the formation of a highly dispersed system with a predominance of particles approximately 5 μm in size, indicating efficient disruption of plant cell structures and enhanced mass transfer. Compared with conventional hot-water diffusion extraction, the proposed method reduced the extraction time by approximately twofold without preliminary heating of the extraction solvent. The absence of high-temperature treatment promotes the preservation of total soluble solids under room temperature conditions, which is promising for heat-sensitive compounds while simultaneously reducing energy consumption. The obtained results confirm the potential of the discrete-pulse energy input method as an energy-efficient green extraction technology for the production of chicory extracts enriched with inulin and other valuable bioactive compounds.