11 December 2020 in Science
Cracking the problem of cracking cathodes: Polycrystalline cathode materials that contain a combination of nickel, manganese, and cobalt have been used for advanced lithium batteries. These materials fracture at high voltage, which increases surface area and leads to more side reactions and shorter cycle life. Using single-crystalline samples as model materials, Bi et al. observed changes in nickel-rich cathodes to study the fracture behavior under well-characterized conditions. As the material is charged and lithium is removed, specific planes glide over one another and microcracks are observed. However, this process is reversed on discharge, removing all traces of the microcracking. The authors developed a diffusion-induced stress model to understand the origin of the planar gliding and propose ways to stabilize these nickel-rich cathodes in working batteries. Science , this issue p. 1313
7 October 2024 in Nature Energy
12 February 2022 in Energy Storage Materials
6 March 2025 in Nature Energy
Li2O is rarely used for cathode material synthesis due to its high melting point (1,438 °C). Here we discover that Li2O can sublimate at 800–1,000 °C under ambient pressure, opening new possibilities for cathode synthesis. We propose a mechanism that enables synthesis of single crystals—such as LiNi0.8Mn0.1Co0.1O2 (NMC811) or LiNi0.9Mn0.05Co0.05O2 (NMC90)—without direct contact with Li2O salts. We show that Li2O vapour successfully converts spent polycrystalline NMC811 into segregated single crystals without milling or post-treatment. The Li2O vapour, derived from Li2O solids, diffuses rapidly and reacts with precursors, mimicking a molten-salt environment, which facilitates single-crystal growth. The chemical lithiation process continuously drives Li2O sublimation, sintering the crystals. Single crystals derived from Li2O and fresh precursors or spent polycrystals exhibit outstanding cycling after 1,000 cycles in full cells. The demonstrated Li2O sublimation and its universal role in promoting single-crystal growth provides an effective approach for single-crystal synthesis, scale-up and recycling.
1 February 2022 in Journal of the Electrochemical Society
High-capacity Ni-rich cathode such as LiNi0.8Mn0.1Co0.1O2 (NMC811) has a great potential to enable high energy lithium-ion batteries (LIBs) for long-range electrical vehicles. However, the utilization of NMC 811 in large-scale application is still challenging. While many published papers on NMC811 focus on materials modification, the moisture sensitivity of NMC811 and its implications in storage and large-scale electrode coating are not well explored, not to mention how to overcome those challenges for industry application. This work discusses the key parameters impacting the rheological properties of NMC811 slurries and their correlations to the properties of dried electrodes. Effective solutions are proposed to address the gelation issue of NMC811 slurry during large-scale coating to hopefully inspire more effective and practical approaches to tackle the grand challenges in electrochemical energy storage.
15 April 2021 in ACS Applied Materials & Interfaces