Cracking the problem of cracking cathodes: Polycrystalline cathode materials that contain a combination of nickel, manganese, and cobalt have been used for advanced lithium batteries. These materials fracture at high voltage, which increases surface area and leads to more side reactions and shorter cycle life. Using single-crystalline samples as model materials, Bi et al. observed changes in nickel-rich cathodes to study the fracture behavior under well-characterized conditions. As the material is charged and lithium is removed, specific planes glide over one another and microcracks are observed. However, this process is reversed on discharge, removing all traces of the microcracking. The authors developed a diffusion-induced stress model to understand the origin of the planar gliding and propose ways to stabilize these nickel-rich cathodes in working batteries. Science , this issue p. 1313

Getting closure in ferroelectric films: Ferroelectric materials have a spontaneous electric polarization that can be manipulated for applications. The polarization is usually not uniform throughout the material, and for nanosized ferroelectrics, polarization can be quite complex. Using scanning transmission electron microscopy, Tang et al. found that in thin films of the ferroelectric PbTiO ₃ , the polarization vector rotated in space, forming a closed loop, the so-called flux closure. The flux closure structures formed an array, with the period dependent on the width of the thin film, and caused the buildup of considerable strain within the crystal lattice of the material Science, this issue p. 547