Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising eco-friendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 ± 1.3 and 17.3 ± 6.8 Ω, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 ± 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during long-term operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.
A novel type of organic polymer–inorganic hybrid material layered crystalline zinc poly(styrene-phenylvinyl phosphonate)-phosphate (ZnPSPPP) was prepared by the reaction of styrene-phenylvinyl phosphonic acid copolymer with zinc acetate dihydrate and sodium dihydrogen phosphate. The ZnPSPPP were characterized by FT-IR, diffusion reflection UV-Vis, AAS, N2 volumetric adsorption, SEM, TEM and TG. Unexpectedly, the layered crystalline ZnPSPPP obtained was not synthesized with traditional methods as other zinc phosphonates, but with the ones for amorphous reactions without addition of any template. It can be deduced that the layered crystalline ZnPSPPP could have potential applications for heterogeneous catalyst supports.
Bioelectrochemical system (BES) can provide sustainable solutions for wastewater treatment through lower energy consumption, reduced carbon emissions, and nutrient capture and reuse. Herein, we propose a hybrid bioelectrochemical assembly (HBA)-centered purification-power-cultivation process to achieve hierarchical C, N, and P metabolism, graded power generation, and reusable water production. The hybridization of abiotic and biotic cathode BESs in HBA enables hierarchical C metabolism, with effluent COD directly meeting the Class Ⅲ surface water standard. The customized water-permeable biofilm separators sequentially create anaerobic-anoxic-aerobic zones within HBA, enabling complete N removal. Subsequently, the P-rich tailwater of HBA is channelled into a hydroponic irrigation system for P utilization, ultimately producing reusable clean water. Notably, a high power density of 0.43 W m–2 is obtained, and this process achieves a net carbon emission of –0.413 kg-CO2 m–3. This study presents a prototype for sustainable wastewater purification, particularly in low-resource areas with carbon emission reduction and carbon neutrality targets.