1 January 2007 in International Journal of Environmental Science and Technology
25 December 2018 in Adsorption Science & Technology
Adsorption behaviours of humic acid on three natural clays from Ivory Coast were studied. In order to investigate the adsorption mechanism, characterization of clays and the humic acid–clay complex was conducted by using various analytical methods (attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), specific surface area analysis (BET) and chemical composition). As a result, adsorption process showed that the maximum adsorption capacity of humic acid was achieved at pH = 3 and was found to be to 115 mg/g obtained for the best sample. For all clays, the adsorption was found to be strongly dependent on pH and well fitted by the Langmuir model. In addition, it was shown that the adsorption capacity was linked to the kaolinite content of each sample. The results showed that humic acid adsorption onto clay was made via electrostatic interactions, ligand exchange and hydrophobic interactions. This study showed that clays are valuable adsorbents for the removal of humic acid.
8 September 2020 in Clay Minerals
This paper deals with the adsorption of an essential oil (EO) on a kaolinite-rich clay and a smectite-rich clay. The two clays were modified with a quaternary alkyl ammonium surfactant to create a lipophilic environment for better adsorption of the EO. The preparation of the clay/EO hybrids avoided the use of a slurry and organic solvent. The selected EO was that ofLippia multiflora. This EO has insecticidal properties. The surfactant was trioctyl methylammonium (TOMA). The modified clays were characterized by X-ray diffraction (XRD) and infrared (IR) spectroscopy. The smectite-rich clay displayed greater adsorption of theL. multifloraEO compared to the kaolinite-rich clay. The interlayer space of the kaolinite-rich clay was not affected by the adsorption of the TOMA and/or EO molecules, which suggests that the adsorption in this clay took place on the external surface. By contrast, a significant increase in the interlayer space of the smectite-rich clay was observed, suggesting that the adsorption process of TOMA and/or EO took place on both the external and internal surfaces. The IR analysis showed that the surfactant loading in the interlayer space of the smectite-rich clay introduces a gauche conformation in the alkyl chains. A formulation mixing this local smectite-rich clay and theL. multifloraEO has potential for the manufacture of new biopesticides.
9 March 2021 in Applied Petrochemical Research
OMOumarou Abdoulaye Dan Makaou
Oumarou Abdoulaye Dan Makaou
Two semi-synthetic clay-based catalysts were prepared. These catalysts were obtained by incorporating lanthanum oxide (Cat1) and chromium oxide (Cat2). They were then tested for catalytic cracking of a heavy petroleum residue (fuel). The two formulations were carried out in the presence of silica to improve their acidity then underwent an acid activation. The catalysts obtained were characterized by various methods (XRD, FTIR, ICP-OES, SEM). The results showed that the incorporation of oxides and the addition of silica improves the structural characteristics of the final products. The support used was a kaolinite rich clay, having a specific surface area of 15.26 m2/g and acidity of 14 meq/g. These values increase, respectively, to 456.14 m2/g and 50 meq/g for Cat1 and to 475.12 m2/g and 57 meq/g for Cat2. The influence of the type of oxide incorporated, the specific surface area, the porosity and the acidity of the catalysts on their catalytic activity was studied. The nature of the oxide used proved to be decisive on the quality of the catalyst. Thus Cat1, prepared with lanthanum oxide, showed the best performance in cracking the petroleum residue achieving a conversion rate of 74.13% compared to 66.53% for cat2.
1 July 2011 in Journal of Applied Sciences