Equivalence between the switched inductor boost (SIB) converter and the tapped inductor boost (TIB) converter is suggested and the required conditions are derived. Based on the equivalence conditions, it is further shown that dynamic model of the SIB converter is merely a private case of the more general TIB converter. The model is derived using the tapped inductor switcher switched flow graph modeling approach. Simulation and experimental results are also reported.
26 April 2022 in IEEE Transactions on Power Electronics
This article suggests a unified modeling approach to the analysis of tapped-inductor converters. The leakage inductance, inherent to coupled magnetic structures, and the associated snubber circuit effects were considered and incorporated into the suggested model. The proposed nonideal tapped inductor switcher model is formulated as an equivalent subgraph that can help to model most, if not all, converter topologies that comprise a two-winding tapped inductor. Both the continuous current mode and the discontinuous current mode were modeled. To validate the proposed approach, analysis of a Flyback converter with an RC snubber is presented. Theoretical prediction of the steady-state and small-signal behavior of the converters were confirmed by simulation and experimental results.
Switched inductor (SI) converters are popular in applications requiring a steeper conversion ratio. However, these converters operate a twin inductor switching cell, which complicates the small-signal modeling. This paper proposes an expeditious small-signal analysis method to model the SI converters. The offered modeling approach is hinged on the analogy existing between the SI converters and certain Tapped Inductor (TI) converters. It is suggested here that by virtue of the analogy of the SI converters and TI converters the small-signal model of the SI converter is identical to that of its ideal TI counterpart. Hence, the recently developed Tapped Inductor Switcher (TIS) methodology can be applied to the modeling of the SI converters as well. As an example, the small-signal model of the Switched Inductor Buck converter is obtained. Theoretical analysis was confirmed by simulation and experimental results. In addition, several other SI converters and their TI counterparts are identified.