Teresa Guaragnone

Teresa Guaragnone

Auto-generated profile, based on publicly available information

Teresa Guaragnone

CSGI─Center for Colloid and Surface Science , Via della Lastruccia 3

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2022 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
TGTeresa Guaragnone
Teresa Guaragnone
MRMarta Rossi
Marta Rossi
DCDavid Chelazzi
David Chelazzi
Rosangela MastrangeloRosangela Mastrangelo
Rosangela Mastrangelo
MSMirko Severi
Mirko Severi
PBPiero Baglioni
Piero Baglioni
Bronze artifacts constitute a fundamental portion of Cultural Heritage, but effective methodologies for the removal of corrosion layers, such as those produced by the “bronze disease”, are currently missing. We propose the formulation and application of novel poly(2-hydroxyethyl methacrylate) (pHEMA) networks semi-interpenetrated (SIPN) with poly(acrylic acid) (PAA) to achieve enhanced capture of copper ions and removal of corrosion products. The pHEMA/PAA SIPNs were designed to improve previous pHEMA/poly(vinylpyrrolidone) (PVP) networks, taking advantage of the chelating ability of pH-responsive carboxylic groups in PAA. Increasing the pH ionizes carboxyls, increases the porosity in pHEMA/PAA, and leads to the co-presence of enol and enolate forms of vinylpyrrolidone (VP), changing the macroporosity and decreasing the mesh size in pHEMA/PVP. The ion–matrix interaction is stronger in pHEMA/PAA, where the process occurs through an initial diffusion-limited step followed by diffusion in smaller pores or adsorption by less available sites. In pHEMA/PVP, the uptake is probably controlled by adsorption as expected, considering the porogen role of PVP in the network. Upon application of the SIPNs loaded with tetraethylenpentamine (TEPA) onto corroded bronze, copper oxychlorides dissolve and migrate inside the gels, where Cu(II) ions form ternary complexes with TEPA and carboxylates in PAA or carbonyls in PVP. The removal of oxychlorides is more effective and faster for pHEMA/PAA than its /PVP counterpart. The selective action of the gels preserved the cuprite layers that are needed to passivate bronze against corrosion, and the pH-responsive behavior of pHEMA/PAA allows full control of the uptake and release of the Cu(II)–TEPA complex, making these systems appealing in several fields even beyond Cultural Heritage conservation (e.g., drug delivery, wastewater treatment, agricultural industry, and food chemistry).

12 May 2020 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
MBMichele Baglioni
Michele Baglioni
TGTeresa Guaragnone
Teresa Guaragnone
Rosangela MastrangeloRosangela Mastrangelo
Rosangela Mastrangelo
FSFelipe Hidetomo Sekine
Felipe Hidetomo Sekine
TOTaku Ogura
Taku Ogura
PBPiero Baglioni
Piero Baglioni
The use of nanostructured fluids (NSFs, i.e. micellar solutions and microemulsions) in art conservation is often associated to cleaning purposes, as the removal of polymeric coatings and/or soil from artistic surfaces. In both cases, the use of NSFs grants significant improvements over the use of traditional cleaning techniques that employ neat unconfined organic solvents, water, or aqueous solutions. The study of the nature and properties of surfactants present in NSFs formulations is important to boost the effectiveness of these systems in applicative contexts, and in the search of innovative and highly performing amphiphiles. This work reports on the methoxy-pentadeca(oxyethylene) dodecanoate (MPD) surfactant in two different NSFs, whose utilization in conservation of cultural heritage is new. Its effectiveness is compared to the conventional nonionic amphiphiles used in conservation practice, as pentadeca(oxyethylene) dodecyl ether (PDE), for the cleaning of poly(ethyl methacrylate/methyl acrylate) 70:30, p(EMA/MA), and artificially soiled surfaces. The mechanism, through which NSFs interact with polymeric coatings or soiled surfaces, was investigated by confocal laser scanning microscopy (CLSM), fluorescence correlation spectroscopy (FCS), photographic observation, contact angle, surface tension measurements, and small-angle X-ray scattering (SAXS). The results highlighted the superior MPD’s performance, both in inducing polymer removal and in detaching the soil from coated surfaces. At the micro-scale, the cleaning involves dewetting-like processes, where the polymer or the soil oily phase are detached from the surface and coalesce into separated droplets. This can be accounted by considering the different surface tension, and the different adsorption mechanism of MPD with respect to ordinary nonionic surfactants (likely due to the methyl capping of the polar head chain and to the presence of the ester group between the hydrophilic and hydrophobic parts of the MPD surfactant molecule), showing how a tiny change in the surfactant architecture can lead to important differences in the cleaning capacity. Overall, this paper provides a detailed description of the mechanism and the kinetics involved in the NFS cleaning process opening new perspectives on simple formulations able to target at a specific substance to be removed. This is of uppermost importance in the conservation of irreplaceable works of art.

29 August 2023 in Heliyon
Verified
Journal Article
Open access
Francesca BoccacciniFrancesca Boccaccini
Francesca Boccaccini
CRCristina Riccucci
Cristina Riccucci
EMElena Messina
Elena Messina
MPMarianna Pascucci
Marianna Pascucci
Ferdinando BosiFerdinando Bosi
Ferdinando Bosi
GCGabriella Di Carlo
Gabriella Di Carlo
The reproduction of archaeological corrosion patinas is a key issue for the reliable validation of conservation materials before their use on cultural objects. In this study, bronze disks were intentionally buried for 15 years in the soil of the archaeological site of Tharros, both in laboratory and in situ, with the aim of reproducing corrosion patinas typical of archaeological artifacts to be used as representative surfaces for testing novel cleaning gels. The microstructural, microchemical and mineralogical features of the patinas were analyzed by a multianalytical approach, based on optical microscopy (OM), field emission scanning electron microscopy coupled with energy dispersive spectrometry (FE-SEM-EDS) and X-ray diffraction (XRD). The patinas developed in 15 years were compared with an archaeological bronze recovered from the same site after about two thousand years of burial (referred as short-term and long-term interaction, respectively). Results revealed a similar corrosion behavior, especially in terms of chemical composition and corrosion mechanisms. XRD detected the ubiquitous presence of cuprite, copper hydroxychlorides and terrigenous minerals, while OM and FE-SEM-EDS analyses of cross-sections evidenced similar patinas’ stratigraphy, identifying decuprification as driving corrosion mechanism. However, some differences related to the type of local environment and to the time spent in soil were evidenced. In particular, patinas developed in situ are more heterogeneous and rougher, while the archaeological one is thicker and presents a major amount of cuprite, terrigenous deposits and uncommon corrosion compounds. Based on our findings, the disks buried in situ were selected and used as disposable substrates to study the cleaning effect of a novel polyvinyl alcohol (PVA)-based gel loaded with a chelating agent (Na2EDTA · 2H2O). Results show that the gel is effective in removing disfiguring degradation compounds and preserving the stable and protective patina. Based on the conservation needs, the time of application can be properly tuned. It is worth noticing that after a few minutes the green corrosion products can be selectively removed. The EDS analysis performed on the gels after cleaning reveals that they are highly selective for the removal of copper(II) compounds rather than Cu(I) oxide or Cu(0) from bronze substrates.

21 April 2025 in Langmuir
Verified
Journal Article
Open access
Rosangela MastrangeloRosangela Mastrangelo
Rosangela Mastrangelo
TGTeresa Guaragnone
Teresa Guaragnone
ACAndrea Casini
Andrea Casini
DBDamiano Bandelli
Damiano Bandelli
DCDavid Chelazzi
David Chelazzi
PBPiero Baglioni
Piero Baglioni
The remedial conservation of cultural heritage requires advanced functional materials that span from soft matter to nanostructured formulations, whose study is relevant to different fields, ranging from cosmetics and detergency to tissue engineering. In the vast landscape of innovative materials developed to counteract artwork degradation, gels have emerged as ideal candidates for cleaning delicate and complex surfaces. More specifically, twin-chain networks (TCNs), i.e., sponge-like hydrogels obtained through spontaneous polymer-polymer phase separation and sustainable freeze-thawing, showed unprecedented cleaning performances on modern/contemporary iconic paintings, such as works by Jackson Pollock and Pablo Picasso. The key to their efficacy lies in the complex cleaning mechanism at the gel-substrate interface. Recent findings suggest that the pore size and connectivity, affecting the nanoscale tortuosity, play a crucial role in determining the gels' uptake (cleaning) ability. Nonetheless, diffusion of soil through the gel networks is only part of the complex processes that control the removal of unwanted layers from painted surfaces. A deeper understanding of the cleaning mechanism requires studying the uptake of solid particulate matter: gel adhesion and surface roughness affect the cleaning performance of a gel. In this work, TCNs with modulated porosity, obtained by mixing poly(vinyl alcohol)s (PVAs) of different hydrolysis degrees and molecular weights, were characterized through different techniques (confocal laser scanning microscopy, scanning electron microscopy, differential scanning calorimetry, and rheology) to relate porosity and structural features to the surface roughness and diffusional properties of the gels. Finally, cleaning tests on model painted surfaces revealed a clear connection between the surface inhomogeneity and the cleaning performance of the gels.

26 August 2026 in ACS Omega
Verified
Journal Article
Open access
ACAndrea Casini
Andrea Casini
LBLucia Bucciacchio
Lucia Bucciacchio
TGTeresa Guaragnone
Teresa Guaragnone
DBDamiano Bandelli
Damiano Bandelli
Rodorico GiorgiRodorico Giorgi
Rodorico Giorgi
Iron-based artworks, often exposed to harsh environmental conditions that accelerate degradation, require conservation methods that balance effective cleaning with environmental impact. Traditional cleaning techniques, which rely on aggressive chemical agents, can damage both the artworks and the surrounding environment, highlighting the critical need for more sustainable alternatives. In response, this study explores a novel approach utilizing a cross-linked gel matrix derived from Jin Shofu starch, chemically and physically modified, and combined with citric acid, a natural chelating and cleaning agent. The cross-linking process is achieved using sodium trimetaphosphate and sodium tripolyphosphate, which are common in the food industry for modifying starch properties. In addition, the freeze–thaw technique exploits the formation and melting of ice crystals to alter the molecular structure of starch, creating new hydrogen bonds and reinforcing the starch matrix’s internal cohesion. This method eliminates the need for additional chemical agents, further advancing the sustainability of the process. The starch-based gel’s biodegradability and compostability ensure that any waste generated during the cleaning process can be disposed of in an environmentally friendly manner, reducing the overall impact of conservation practices.