1 March 2020 in Journal of Sound and Vibration
3 January 2021 in Journal of Vibration Engineering & Technologies
1 January 2020 in Engineering Solid Mechanics
11 April 2023 in Journal of Vibration Engineering & Technologies
Purpose: To establish a smart thin plate in which structural health monitoring (SHM) and active vibration control purposes are integrated, the locations of attached piezoelectric ceramic (PZT) actuators as well as their applied normalized voltage are investigated. Method: Normal strains of such coupled electro-mechanical systems are defined using Kirchoff's classical laminate plate theory (CLPT), and then, by Ritz solution, these normal strains are converted to spatially dependent functions that are employed to define virtual work for the actuators as a function of location and applied voltage. Finally, genetic algorithm (GA)-based iterative optimization is carried out to locate the actuators as well as determine the normalized applied voltage for each of them in the desired modes. Results: Three plates with different boundary conditions are studied for optimal placement of PZT actuator/s . The PZT actuator/s are optimally placed where the maximum amount of exerted virtual work is reached to fulfil the perfect excitation needed by SHM and provide the highest damping energy for undesired vibration at designated modes. The results show that the optimum location of PZT actuator/s lies where the maximum sum of normal strains is. Conclusion: The proposed process is valid for any mixed boundary conditions on a thin plate with any number of square actuators with a minimum computational effort, where both location of the actuator/s and applied voltage can be manipulated via GA to achieve the maximum exerted work done by PZT actuator/s at each desired natural mode.
25 August 2015 in Journal of Thermoplastic Composite Materials
In the present work, static deformation, dynamic characteristic, and time response of laminated composite plates with surface-bonded shape-memory alloy (SMA) sheets are modeled. A modified higher order shear deformation theory with Ritz method is utilized. The energy balance equations are used to formulate the nonlinear heat transfer governing equations. The time response of the SMA/elastomer plate and the deflection as well as dynamic characteristics before and after activation of the SMA is computed. A Mathematica code is developed to analyze different plate problems. Parametric studies are performed for proposed structure system to demonstrate the effect of thickness ratio, aspect ratio, material properties, thermal expansion coefficient, electric input power, and thickness of SMA sheet on the transverse deflections, natural frequencies, and response time of the SMA layer. The obtained results are compared to the available studies solved by different theories.
1 November 2017 in Aerospace Science and Technology