Multi-cell thin-walled structures have recently gained attentions in aerospace and automotive industries for their excellent energy absorption capacity with lightweight. This paper introduces a novel 3D-multi-cell design to enhance energy absorption capability of multi-cell thin-walled tubes by performing a new arrangement of the internal webs and dividing them into multilayers with different angles of orientation. A comparative study of energy-absorbing performance of single-cell, conventional multi-cell and the proposed three-dimensional multi-cell (3D-multi-cell) of thin-walled circular tubes under axial impact loading is carried out using the non-linear finite element code ANSYS-WORKBENCH/LS-DYNA. The numerical results show that the 3D-multi-cell configuration can achieve a significant improvement in the energy absorption per unit mass (SEA) up to 40%, the crush force efficiency (CFE) up to 42.5%, and the energy absorption effectiveness factor (ψ) up to 30.7% in comparison with those of circular tube. Furthermore, it can significantly improve the SEA up to 20%, the CFE up to 36.8%, and the ψ up to 20% in comparison with those of conventional multi-cell configuration. Furthermore, it is found that the number of layers and angle of orientations have a distinctive effect on the energy absorption capacity and the CFE.
1 February 2017 in Latin American Journal of Solids and Structures
State-of-the art studies of impact crushing circular stepped tube (inversion tube) introduce various approaches to improve the energy absorption capacities. Adding external longitudinal stiffeners on the circular stepped tubes is a new approach that have a great effect and interest. In the current study, finite element analysis using (LS-DYNA/WORKBENCH ANSYS) is performed on a series of numerical models of aluminum circular stepped tubes that are externally stiffened by a constant number of longitudinal stiffeners distributed around the cross section of the circular stepped tube. The numerical models are implemented under an axial impact crushing scenario. Furthermore, a new improved formula for prediction of steady inversion load is proposed. The theoretical predictions are found to be in good agreement with the numerical results with an error within 12%. A comparative study is conducted to compare the energy absorption characteristics and inversion mechanism between the newly proposed tubes and the conventional stepped tube. The results showed that addition of external longitudinal stiffeners on circular stepped tubes could imply greatest improvement for the energy absorption up to 104%, specific energy absorption capability (energy absorption per unit mass) up to 54.9%, the crush force efficiency up to 40.3% and increase the inversion stroke length in comparison with the unstiffened circular stepped tubes. A newfound role of external longitudinal stiffeners added to the stepped tubes that controls the inversion and deformation mechanism is presented.
1 November 2017 in Aerospace Science and Technology