18 May 2017 in Journal of Mechanisms and Robotics
This paper proposes a series of double C-type flexure hinges for lamina emergent mechanisms (LEMs), designs the structure, and deduces the formula of the equivalent stiffness of the double C-type flexure hinge. Theoretical calculation and finite element simulation analyses of the design examples are used to verify the correctness of the equivalent stiffness calculation formula. In order to improve the bending performance of the flexure hinges, we propose a method to remove some materials of the semicircle of the flexure hinges according to certain rules. Then, the structure of the double C-type flexure hinge is further improved. Finally, the performance of the improved and unimproved double C-type flexure hinges is compared through the finite element simulation analysis, and the results show that the bending performance of the improved double C-type flexure hinge is better than the unimproved double C-type flexure hinge, while the antitensile properties undergo no significant decline.
8 April 2020 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
11 March 2024 in Smart Materials and Structures
This paper presents a novel contact-aided flexure hinge (CAFH) with variable stiffness, which consists of a contact-aided segment, a flexible segment and a rigid part. The proposed CAFH can facilitate a compact design and provide an alternative for stiffness-variable designs under any loading conditions. With a mortise-tenon structure, the CAFH is trivially affected by friction. The design and deformation procedures of the CAFH are described in detail, followed by its theoretical kinetostatic modeling using the chained beam-constraint model. The deformation of all segments is considered in the kinetostatic model, which expands the space of design parameters for stiffness-variable designs. Then, the accuracy of the theoretical model and the variable stiffness design are verified by nonlinear finite element analysis (FEA) and experimental tests. In term of stiffness, the maximum relative errors of the theoretical model are 0.76% in Stage 1 and 0.70% in Stage 2, as compared with FEA, respectively. Further, the parameter sweep is carried out, followed by sensitivity analysis to identify the main test error sources. Finally, the multi-material scenarios are investigated preliminarily, and some outlooks are discussed.
22 May 2024 in Engineering Research Express
Kresling origami is a topic that is constantly being researched, especially when it comes to the cylindrical mechanisms made up of special quadrilateral units. It’s also fascinating that the conical mechanisms based on the Kresling pattern are gaining more attention lately. However, designing conical mechanisms with stable behavior and solving the stress concentration in crease areas for practical engineering applications remains less researched. Therefore, this study considers quadrilateral unit cells as the research object, designs a conical origami tube (COT), and establishes a theoretical model with five variables to systematically investigate the COT. Based on this, the design domain related to the design variables is proposed, and the COT is analyzed in three cases. We further explored the influence of η (conical degree) on the COT. In addition, this study implements a cutting design on each crease vertex to reduce the impact of stress concentration on the nonlinear response through finite element shell models and uniaxial compression experiments. The findings of this study reveal that the setting of η and the crease-cutting design have a remarkable impact on the mechanical properties and stability behavior.