Four sources of variability, metal grain granularity (MGG), line-edge roughness (LER), gate-edge roughness (GER), and random discrete dopants (RDD), affecting the performance of state-of-the-art FinFET, nanosheet (NS), and nanowire (NW) FETs, are analysed via our in-house 3D finite-element drift-diffusion/Monte Carlo simulator that includes 2D Schrödinger equation quantum corrections. The MGG and LER are the sources of variability that influence device performance of the three multi-gate architectures the most. The FinFET and the NS FET are similarly affected by the MGG variations with threshold voltage and on-current standard deviations significantly lower (at least 20 %) than those of the NW FET. The LER variability has a negligible influence in the NS FET performance with $\sigma ~{V}_{T}$ values around 12 and 42 times lower than those of the FinFET and the NW FET. The three architectures are equally affected by the RDD ( $\sigma {V}_{T}$ = 8 mV) and minimally influenced by the GER ( $\sigma {V}_{T} \approx 4$ mV). The variability of NS FETs makes them strong candidates to replace FinFETs.
The impact of different variability sources on the transistor performance increases as devices are scaled-down, being the metal grain granularity (MGG) and the line edge roughness (LER) some of the major contributors to this increase. Variability studies require the simulation of large samples of different device configurations to have statistical significance, increasing the computational cost. A novel Pelgrom-based predictive (PBP) model that estimates the impact of MGG and LER through the study of the threshold voltage standard deviation $\left(\sigma V_{T h}\right)$ , is proposed. This technique is computationally efficient since once the threshold voltage mismatch is calculated, $\sigma V_{T h}$ can be predicted for different gate lengths $\left(L_{g}\right)$ , cross-sections, and intrinsic variability parameters, without further simulations. The validity of the PBP model is demonstrated for three state-of-the-art architectures (FinFETs, nanowire FETs, and nanosheet FETs) with different $L_{g}$ , cross-sections, and drain biases $\left(V_{D}\right)$ . The relative errors between the predicted and simulated data are lower than 10%, in the 92% of the cases.