Sharing of the frequency bands between radar and communication systems has attracted substantial attention, as it can avoid under-utilization of otherwise permanently allocated spectral resources, thus improving efficiency. Further, there is increasing demand for radar and communication systems that share the hardware platform as well as the frequency band, as this not only decongests the spectrum, but also benefits both sensing and signaling operations via the full cooperation between both functionalities. Nevertheless, its success critically hinges on high-quality joint radar and communication designs. In the first part of this paper, we overview the research progress in the areas of radar-communication coexistence and dual-functional radar-communication (DFRC) systems, with particular emphasis on the application scenarios and the technical approaches. In the second part, we propose a novel transceiver architecture and frame structure for a DFRC base station (BS) operating in the millimeter wave (mmWave) band, using the hybrid analog-digital (HAD) beamforming technique. We assume that the BS is serving a multi-antenna user equipment (UE) over a mmWave channel, and at the same time it actively detects targets. The targets also play the role of scatterers for the communication signal. In that framework, we propose a novel scheme for joint target search and communication channel estimation relying on omni-directional pilot signals generated by the HAD structure. Given a fully-digital communication precoder and a desired radar transmit beampattern, we propose to design the analog and digital precoders under non-convex constant-modulus (CM) and power constraints, such that the BS can formulate narrow beams towards all the targets, while pre-equalizing the impact of the communication channel. Furthermore, we design a HAD receiver that can simultaneously process signals from the UE and echo waves from the targets. By tracking the angular variation of the targets, we show that it is possible to recover the target echoes and mitigate its potential interference imposed on the UE signals, even when the radar and communication signals share the equivalent signal-to-noise ratio (SNR). The feasibility and the efficiency of the proposed approaches in realizing DFRC are verified via numerical simulations. Finally, our discussions are summarized by overviewing the open problems in the research field of communication and radar spectrum sharing (CRSS).
Radar and communications (R&C) as key utilities of electromagnetic (EM) waves have fundamentally shaped human society and triggered the modern information age. Although R&C had been historically progressing separately, in recent decades, they have been converging toward integration, forming integrated sensing and communication (ISAC) systems, giving rise to new highly desirable capabilities in next-generation wireless networks and future radars. To better understand the essence of ISAC, this article provides a systematic overview of the historical development of R&C from a signal processing (SP) perspective. We first interpret the duality between R&C as signals and systems, followed by an introduction of their fundamental principles. We then elaborate on the two main trends in their technological evolution, namely, the increase of frequencies and bandwidths and the expansion of antenna arrays. We then show how the intertwined narratives of R&C evolved into ISAC and discuss the resultant SP framework. Finally, we overview future research directions in this field.
This article presents the results of a series of measurements of multistatic radar signatures of small UAVs at L‐ and X‐bands. The system employed was the multistatic multiband radar system, NeXtRAD, consisting of one monostatic transmitter‐receiver and two bistatic receivers. NeXtRAD is capable of recording simultaneous bistatic and monostatic data with baselines and two‐way bistatic range of the order of a few kilometres. The paper presents an empirical analysis with range‐time plots and micro‐Doppler signatures of UAVs and birds of opportunity recorded at several hundred metres of distance. A quantitative analysis of the overall signal‐to‐noise ratio is presented along with a comparison between the power of the signal scattered from the drone body and blades. A simple study with empirically obtained features and four supervised‐learning classifiers for binary drone versus non‐drone separation is also presented. The results are encouraging with classification accuracy consistently above 90% using very simple features and classification algorithms.
Presented is a statistical analysis of vertically-polarised bistatic sea clutter data, with bistatic angles ranging from 30° to 90°, compared with simultaneously-gathered monostatic clutter data. It is found that there is no significant change in the bistatic reflectivity compared to the monostatic except close to bistatic angles of 90°. It is found that the shape parameter of the K-distribution fitted to the clutter is significantly higher for the bistatic clutter than for the equivalent monostatic clutter.
13 February 2020 in IEEE Geoscience and Remote Sensing Letters
One of the principal limitations of employing a ground-penetrating radar (GPR) for landmine detection is the presence of clutter, i.e., reflections from the surrounding environment, which might interfere with the landmine echoes. Clutter presents similar scattering characteristics as typical targets and may significantly raise the detection threshold of the system. The capability to characterize the internal structure of a buried target might provide key unique information to develop advanced landmine-clutter discrimination algorithms, considering that the presence of internal scattering components can be univocally associated with man-made targets. In this letter, the possibility of identifying and characterizing these contributions from the GPR signature of a landmine is numerically assessed and experimentally validated. The simulated response from a landmine-like target shows that the presence of an internal structure generates additional reflection peaks, as a consequence of the layered structure of the object, and the field trials corroborate that it is possible to identify these scattering components and delineate their spatial distribution.
Cognitive radar is a rapidly developing area of research with many opportunities for innovation. A significant obstacle to development in this discipline is the absence of a common understanding of what constitutes a cognitive radar. The proposition in this study is that radar systems should not be classed as cognitive, or not cognitive, but should be graded by the degree of cognition exhibited. The authors introduce a new taxonomy framework for cognitive radar against which research, experimental and production systems can be benchmarked, enabling clear communication regarding the level of cognition being discussed.