7 March 2024 in IEEE Transactions on Plasma Science
A novel low loss sawtooth (ST) slow wave structure (SWS) is proposed as a solution to the challenges presented by terahertz (THz) traveling wave tubes (TWTs), known for their machining difficulty and insertion loss. Compared with folded waveguide (FWG) SWS, the ST SWS is easier to machine and takes a 44.96% lower insertion loss. Driven by a pencil beam (PB) gun of 19.0 kV, 15.0 mA, and an input power of 1 mW, the comparative output performance of the ST circuit and FWG circuit is evaluated using the particle-in-cell (PIC) method. The ST circuit shows enhancement in both the maximum output power and 3-dB bandwidth, which improved by 13.21% and 42.86%, respectively.
21 March 2025 in IEEE Transactions on Plasma Science
The terahertz (THz) traveling wave tube (TWT) is characterized by low interaction efficiency and insufficient output power. Higher power can be obtained by minimizing insertion loss through advanced processing techniques. The 0.65 THz high-frequency circuits, composed of serpentine waveguide (SWG) slow wave structure (SWS), were designed, fabricated, cold tested, and analyzed in this article. The high-frequency characteristics of the process-adapted SWSs, applicable to both the high-precision computer numerical control (CNC) and deep reactive-ion etching (DRIE) technologies, are analyzed and compared. Then, two high-frequency circuits for high power 0.65 THz TWT are fabricated by those micro-electro-mechanical system (MEMS) technologies. The circuits fabricated by CNC and DRIE techniques exhibit superior equivalent conductivity of $2.4\times 10^{7}$ S/m in cold test. Benefiting from the high precision bonding and DRIE technology feature, the circuit can eliminate the $3\pi $ /2 point cave in the ${S} _{21}$ curve. The particle-in-cell (PIC) simulation results of the 3-D models, reconstructed based on the cold test data, predict that low-loss high-frequency circuits manufactured by advanced manufacturing technologies can achieve 25% output power improvement. Employing the DRIE process, it is possible to not only reduce manufacturing costs and shorten the manufacturing cycle, enabling mass production, but also effectively mitigate $3\pi $ /2 point oscillation, enhancing the stability of the device.
2 May 2025 in IEEE Transactions on Electron Devices
A high-power sawtooth waveguide (STW) high-frequency circuit operating in a 0.65 terahertz (THz) traveling wave tube (TWT) is designed, fabricated, and cold-tested in this article. To address the challenge of the THz electromagnetic (EM) wave being amplified through beam-wave interaction while experiencing significant attenuation on the structure walls of the slow wave structure (SWS). The SWS design process emphasizes achieving a balance between interaction impedance and transmission loss to maximize output power. The optimized STW configuration achieves an interaction impedance of 0.76 Ω with a transmission loss of -1.41 dB/mm. Driven by a 19.5 kV, 15 mA pencil beam (PB), particle-in-cell (PIC) simulations confirm the superiority of this balanced design, demonstrating a saturation output power of 2.75 W. This performance surpasses reference high-impedance (2.52 W) and low-loss (2.35 W) designs by 9.1% and 17.0%, respectively. Iterative fabrication refinements via nano-computer numerical control (CNC) and deep reactive ion etching (DRIE) techniques were implemented to further reduce EM wave attenuation. Cold-test results showed an insertion loss of -10.50 dB at 650 GHz for the 6.6 mm-long nano-CNC fabricated circuit and -25.46 dB for the 25.74 mm DRIE circuit, fitting to equivalent conductivities of 3.0 × 107 S/m and 3.6 × 107 S/m, respectively, exceeding the conventional benchmark 2.0 × 107 S/m over the target frequency range.
20 January 2026 in IEEE Electron Device Letters
This letter presents the compact design and on-chip fabrication of a high-frequency circuit operating at 1.03 THz. A novel folded-cascade approach is proposed to shorten the circuit axial length benefiting the beam transmission and miniaturization of devices. Driven by the 14.5 kV, 3 mA pencil beam with 1 mW input power, the single-stage circuit requires 20.9 mm to reach saturation. The two-stage folded-cascade configuration shortens this length by 32.1% to 14.2 mm, while maintaining identical performance: an output power of 142.5 mW at 1.03 THz and a 3-dB bandwidth from 0.989 to 1.053 THz. Compared to the conventional cascade circuit, the folded-cascade one delivers 25.6% higher output power at the same length. The prototype circuit is fabricated on-chip using deep reactive ion etching (DRIE) technology. Measurement results indicate a dimensional tolerance within 2 μm and a bottom surface roughness of 40–70 nm. During cold-test, the prototype circuit exhibits a reflection below –15 dB across the 0.921–1.085 THz, with an insertion loss of 1.84 dB/mm at 1.03 THz. These advances provide a promising solution for developing compact, high-performance integrated on-chip THz TWT.
11 July 2025 in IEEE Transactions on Plasma Science
In the terahertz (THz) band, electron beam quality significantly influences beam-focused transmission and beam-wave interaction, and the compressive electric field distribution determines it. This article introduces a stepped-conical (SC) electron gun optimized to improve beam laminarity. Compared with the traditional single-stage (SS) gun, the SC gun reduces velocity dispersion by 36.9%, resulting in a 55.3% reduction in population velocity standard deviation ( $\sigma $ ). Under a 0.67-T uniform magnetic (UM) field focusing, both beams achieve transmissions over 99% within a 40- $\mu $ m-radius, 80-mm-length beam tunnel. Verified through CST particle-in-cell (PIC) simulations, the hot transmission of the SC gun-based beam could maintain an over 99% transmission ratio, while the SS gun decreased to 95.6%. Under the 1-mW input signal, the SS gun-based beam amplifies the signal by 40 dB in the slow wave structure (SWS) circuit, yielding an output power of 400 mW. In contrast, the SC gun-based beam achieves a gain of 48 dB and an output power of 900mW, representing a 112.8% improvement. The high-quality electron beam generated by the SC electron gun not only enhances the transmission efficiency of ultrafine electron beams but also significantly improves the gain and power output of the THz traveling-wave tubes (TWTs).