Hot electrons with high kinetic energy could be generated in the channel of GaN high-electron-mobility transistors (HEMTs) during hard switching operation. Those “lucky” hot electrons scattered to the vulnerable interface between the passivation and barrier layers could bombard the interface region and create new defects that would lead to degradation of the dynamic on-resistance ( ${R}_{ON}$ ) after long-term operations. In this work, we propose a solution to the hot-electron induced device degradation through channel engineering, i.e., deploying a double-channel structure in place of the conventional single-channel structure in ${p}$ -GaN gate HEMTs. It is revealed that hot electrons are mostly generated in the lower channel and thus the additional scattering interface can effectively deter the hot electrons from reaching the vulnerable surface. Dynamic ${R}_{ON}$ degradation induced by long-term stresses at “semi-on” states is shown to be substantially suppressed in the ${p}$ -GaN gate HEMT with the double-channel structure.
27 December 2024 in IEEE Transactions on Electron Devices
A gallium nitride (GaN) two-stage comparator based on complementary logic (CL) architecture is demonstrated and systematically investigated. The comparator features monolithically integrated enhancement-mode n-channel and p-channel GaN field-effect transistors on a commercial p-GaN gate high-electron-mobility transistor (HEMT) platform. Benefiting from energy-efficient CL configuration, the two-stage comparator exhibits rail-to-rail operation from 25 °C to 200 °C with reduced power consumption. The temperature-dependent voltage transfer characteristics, output waveforms, and frequency responses of the fabricated two-stage comparator are studied in detail to reveal limiting factors and corresponding mechanisms of n-/p-FETs on circuit performance. These results can provide valuable insights for the further development of GaN CL integrated circuits (ICs) for next-generation power conversion systems.
Electroluminescence (EL) of a Schottky-type ${p}$ -GaN gate double-channel (DC-) GaN high-electron-mobility transistor (HEMT) was investigated to understand the mechanism of the carrier dynamics in the gate stack. This work revealed the unique bipolar carrier injection dynamics in the DC-HEMT under forward gate bias by analyzing the EL characteristics with bias and temperature dependence. Compared to a conventional single-channel (SC-) HEMT, the AlN insertion layer (AlN-ISL) in DC-HEMT plays the role of a blocking layer to the holes injected from gate to channel and creates a hole-storage effect that effectively suppresses the channel-to-gate electron spillover at forward gate bias.
A 600-V p-GaN gate double channel HEMT (DC-HEMT) is presented with a systematic investigation of the gate characteristics, including the leakage current, breakdown, and reliability under forward bias stress. It is found that the gate leakage of the DC-HEMT is substantially lower than that of the p-GaN single channel HEMT (SC-HEMT) owing to suppressed electron spillover that stems from hole storage in the quantum well upper channel. Consequently, the gate breakdown voltage of the DC-HEMT is improved to 14.7 V compared to 12.2 V of the SC-HEMT. Besides, the gate operating voltage margin of the DC-HEMT is expanded to 4.2 V compared to 3.3 V of the SC-HEMT according to the gate lifetime evaluation.