High-frequency power converters enabled by wide bandgap (WBG) and silicon semiconductor devices offer distinct advantages in power density and dynamic performance. However, switching oscillations are commonly observed in these circuits with undesirable consequences. This paper reviews the impacts, root causes, and mitigation techniques of switching oscillations through literature survey, modeling analysis, and experimental investigation. We categorize the following root causes for oscillations during switching transients: 1) damped oscillation triggered by high di/dt and/or dv/dt coupled with parasitic elements; 2) undamped oscillation of WBG devices as part of a negative resistance oscillator; and 3) semiconductor device physical mechanisms such as the negative capacitance phenomenon due to conductivity modulation in insulated gate bipolar transistors or impact ionization in MOSFETs, the plasma extraction transit-time effect in bipolar power devices, and the reverse conduction property of GaN HEMTs. Furthermore, this paper discusses various circuit techniques to suppress switching oscillations, and techniques of extracting parasitic inductances of power devices.
3 January 2018 in IEEE Transactions on Power Electronics
The parasitic inductances of silicon carbide (SiC) power MOSFETs have a major influence on their operation and circuit performance. They incur negative effects such as switching oscillations, power losses and electromagnetic interference (EMI) noise. This paper introduces a new technique to accurately characterize the parasitic inductances of SiC power MOSFETs in both discrete packages and power modules based on two-port S-parameters measurement. By treating a power MOSFET as a two-port network, we obtain the scattering (S) and impedance (Z) parameters from network analyzer measurement. These parameters, through detailed network analysis, provide more accurate values of the internal parasitic inductances than the commonly used single-port impedance measurement technique. The new approach is first verified with high frequency circuit simulation and then applied in the case study of SiC power MOSFETs in a TO-247 discrete package and a half-bridge power module. In addition, a number of silicon power MOSFETs and IGBTs in TO-247, TO-220, D2PAK, DPAK, SO-8 packages are also characterized for comparison. A comparison between the characterization results from the new two-port and the prior art one-port methods reveals a significant difference ranging from 12.6% to 93.9%.