27 December 2022 in IEEE Transactions on Sustainable Energy
Battery energy storage (BES) systems play an increasingly important part in power system operation because of their high efficiency and decreasing cost. This article proposes a mixed integer linear programming (MILP) model of battery degradation considering both depth of discharge (DoD) and state of charge (SoC), which can reflect the battery degradation mechanism. To improve computational efficiency for the economic scheduling of power system, a novel one-dimensional linearization is proposed to linearize this two-variable function, which significantly reduces computation burdens without loss of accuracy. Considering the battery degradation cost, a day-ahead economic scheduling model is built and a MILP algorithm is applied to solve it. The effectiveness of the MILP-based battery degradation model for economic scheduling is validated using the modified IEEE 30-bus system. For comparison, other existing battery degradation models are also implemented in the same system.
26 July 2021 in IEEE Transactions on Power Systems
Microgrids incorporate an increasing number of distributed energy resources (DERs), which induce a higher variability and faster dispatch capabilities in power systems. This paper proposes a two-layer real-time scheduling model for microgrids, based on approximate future cost function (AFCF), where the future cost represents the opportunity cost for the microgrid operation in subsequent periods. At the upper layer, the look-ahead rolling scheduling is adopted to optimize microgrid operations, in which the future cost function (FCF) in deterministic and stochastic scenarios is approximated by a piecewise linear function. At the lower layer, a real-time parameter updating strategy based on real-time data is proposed. In this case, the real-time scheduling readjusts the look-ahead schedule using the immediate cost in the current period and the future cost calculated by the updated AFCF. The proposed two-layer real-time scheduling model uses an offline optimization, in which most of the computation tasks are completed at the upper layer, and applies a real-time optimization, in which the time-consuming problem is avoided at the lower layer. The effectiveness of the proposed two-layer real-time scheduling model of microgrids is validated by using a grid-connected microgrid system. For comparison, other existing real-time scheduling methods are also implemented in the same microgrid system.
24 October 2023 in IEEE Transactions on Smart Grid
Energy indicators on the demand side, such as consumers’ total carbon emissions and energy costs, nodal energy carbon emission intensity (CEI) and energy price (EP), describe the impact of consumers’ energy consumption on system carbon emissions and costs, helping consumers with energy consumption decisions. In this paper, an analytical dynamic energy-carbon flow model of integrated energy system (IES) is proposed, which allocates energy and carbon emissions from supply side to demand side. This method is also applied to cost allocation, resulting in accurate energy indicators for consumers. Firstly, a dynamic energy flow model for an IES is established based on the superposition characteristics of subsystems. Then, a dynamic energy flow tracing (DEFT) method that considers pipeline packing, transmission loss and time delay is proposed first to estimate an analytical energy relationship between sources and loads. Combined with the CEI of sources, a dynamic carbon flow model is proposed to allocate the carbon emissions and form CEI on demand side. We also apply this method to cost allocation, providing consumers with total energy costs and real-time EP. The proposed methodology is validated in a modified IES in Jilin Province, China, and the information conveyed by the energy indicators is completely analyzed.
27 February 2023 in IEEE Transactions on Smart Grid
The multi-energy coupling (MEC) appliances couple electricity, gas, heat, and cold, of which the gas, heat, and cold have long transient processes. However, these transient features have never been considered in past non-intrusive load monitoring (NILM) methods. This paper proposes a novel NILM method for MEC appliances considering spatio-temporal coupling, which combines semi-supervised learning and weakly supervised learning. Firstly, the unlabeled historical events are labeled by graph-based semi-supervised learning (GBSSL) and distinguished into three categories, i.e., reliable, uncertain, and unreliable samples. Then, to fully use of spatio-temporal coupling information, the unreliable samples are discarded and the feature vectors of other samples are expanded into spatio-temporal coupling feature vectors. To improve the accuracy of load identification, this paper proposes a two-stage deep learning framework “Teaching and Mutual Learning” (TML). In the teaching stage, two convolutional neural networks (CNN) are pre-trained with reliable samples. In the mutual learning stage, the noise samples are filtered by using the different learning abilities of the two networks. The effectiveness and superiority of the proposed method are verified on five types of MEC appliances in a park IES.
3 April 2023 in IEEE Transactions on Smart Grid
The study of highly efficient methods for performing multiple energy flow (MEF) computation with epistemic and aleatory uncertainties, known as interval-probabilistic energy flow (IPEF) calculation, is a fast-growing area of research. However, existing approaches are easily caught in a quandary among accuracy, efficiency, and scope of applicability. This paper presents a dual-level surrogate structure (DLSS) for dealing with the IPEF calculation of an integrated energy system (IES) in an accurate and efficient manner. The structure accommodates electricity, heat, and gas, attaining a high-level balance among precision, speed, and range of applicability. At the lower level of DLSS, a sparse polynomial chaos expansion (sPCE) model is employed to directly map random input variables to output boundary values, saving massive repetition of deterministic calculation. At the upper level of DLSS, a heterogeneous-learning-based multiple energy flow (HL-MEF) model is proposed to accelerate the indispensable deterministic MEF calculation for online sampling, thereby easing the computational burden of sPCE training. Finally, numerical results on a real-world electricity-heat-gas system demonstrate that the proposed DLSS can solve the IPEF problem at nearly 400 times the speed of the standard double-layer Monte Carlo simulation (DLMCS) with guaranteed accuracy.
30 December 2024 in IEEE Transactions on Power Systems
In today's interconnected multi-energy systems, the demand for flexible scheduling in integrated energy systems (IES) has significantly increased. To meet this demand, dynamic optimal energy flow (OEF) technology must enhance its accuracy, efficiency, and convergence. This paper presents an innovative dynamic OEF model for IES based on the superposition of energy flow responses, marking the first systematic application of the L-domain energy flow model to OEF. Initially, we establish a reduced order mapping function between known and unknown state variables, leveraging normalized step response matrices of unknown variables for the natural gas and heat networks, which is a direct time-domain discrete mapping that avoids the computational burden introduced by both the element iteration and time-frequency domain conversion. Subsequently, we transform this mapping into a low-dimensional energy flow constraint to construct an OEF model in the superposition form, of which the accuracy is guaranteed by the precise energy flow model, and the efficiency is further improved by the fixed constants within the energy flow constraint. Finally, extensive case studies demonstrate the superior performance of the proposed method compared to existing approaches in accuracy, efficiency, and model complexity.