24 October 2018 in IEEE Transactions on Power Electronics
A sensorless control strategy with one-phase lacking fault-tolerant capability is proposed in this paper for the switched reluctance motors (SRM). This strategy consists of a phase inductance slope zero-crossing detection scheme and a series of phase inductance partition logic algorithms, which is capable of capturing at least one-phase aligned position under both normal operation and one-phase lacking fault operation. With the recorded index position in each electric period, the rotor position can be estimated for sensorless driving accordingly. To ensure stable calculation of the phase inductance in this method, the SRM should be started and operated under single pulse control mode. Thus, for sensorless starting, an idle phase inductance double thresholds based sensorless synthetic starting scheme is also developed. The proposed strategy is easy for implementation and can ensure stable sensorless operation in full speed range. Moreover, it does not need any priori measuring process, complicated logic algorithm or complex mathematical calculation. The theoretical analysis is conducted, and experimental results are provided to verify the feasibility of the proposed control strategy.
25 January 2022 in IEEE Transactions on Power Electronics
In this article, an integrated power converter with dc bus voltage boosting capability is proposed for driving the brushless dc motors. In the topology, a bidirectional buck/boost dc–dc (BBD) converter can be integrated with the three-phase voltage-source inverter (TVSI) through a common three-switch leg. As compared with the traditional TVSI with a front-end BBD converter (TVSI-BBD), one power switch and its associate driving circuits in the BBD converter part can be saved. Thus, the integrated power converter has the benefits of reducing the converter size, lowering system costs, and enhancing power density. To decouple the dc bus voltage boosting control and the speed closed-loop control, a field-oriented control algorithm with space vector pulsewidth modulation technique is also proposed. The feasibility of the driving system is evaluated through systematic analysis and validated experimentally on a developed motor drive system prototype.
19 February 2018 in IEEE Transactions on Power Electronics
In this paper, a position estimation method is proposed to accurately measure the rotor position of a switched reluctance motor equipped with embedded sensing coils under both unsaturated and saturated conditions. This method effectively solves three key problems existing in traditional methods based on embedded sensing coils, which are the mutual induced voltage effect, the main magnetic circuit saturation effect, and low accuracy of the rotational speed estimation in near-zero-speed regions. To address the first problem, the sensing coils are connected into a special designed structure. Then, the sensing coil inductance, which varies with the rotor position, is encoded by some voltage signals. After that, a novel hybrid harmonic filtering algorithm based on a delay filter and a coordinate transformation is proposed to remove the dc, even harmonic, and 3nth harmonic components of the demodulated voltage signals, according to which the rotor position can be estimated continuously and accurately. By applying this hybrid harmonic filter, the main magnetic circuit saturation effect on the position estimation has been indirectly avoided. To solve the third problem, a starting algorithm based on the voltage thresholds is proposed, and a rotational speed estimation method is developed. Detailed experimental results are provided to verify the validity of the proposed methods.