Seong-Kyun Kim

Seong-Kyun Kim

Auto-generated profile, based on publicly available information

Seong-Kyun Kim

Department of Prosthodontics, School of Dentistry, Seoul National University, Seoul, Republic of Korea

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2017 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
SKSeong-Kyun Kim
Seong-Kyun Kim
RMRobert Maurer
Robert Maurer
ASArda Simsek
Arda Simsek
MUMiguel Urteaga
Miguel Urteaga
MRMark J. W. Rodwell
Mark J. W. Rodwell
We present a fully integrated 94-GHz transceiver front-end in a 130-nm/1.1-THz f max InP HBT process. Low power is obtained through low-voltage design and high transistor gain. The IC is designed for multi-function, dual-polarization phased arrays. At 1.5-V collector bias, in dual-polarization simultaneous receiving mode, the IC has 21-dB gain, <;9.3-dB noise figure, and consumes 39 mW, while in transmitting mode with time-duplexed vertical and horizontal outputs, the transceiver front-end achieves 5-dBm output power, 22-dB gain, and consumes 40 mW. At 1-V collector bias, in dual-polarization simultaneous receiving mode, the IC has 22.7-dB gain, <;8.9-dB noise figure, and consumes 26 mW, while in transmitting mode, it has 22-dB gain and the saturated output power of 1.4 dBm with 29-mW power consumption.

6 February 2025 in IEEE Access
Verified
Journal Article
Open access
HNHyohyun Nam
Hyohyun Nam
HKHyeongjin Kim
Hyeongjin Kim
SOSungjae Oh
Sungjae Oh
JKJungsik Kim
Jungsik Kim
CLChae Jun Lee
Chae Jun Lee
DLDae Young Lee
Dae Young Lee
This paper presents a D-band 16-element phased-array transceiver IC with integrated dual-polarized antenna for 6G wireless communications. Fabricated in 28-nm CMOS, the transceiver operates with five component carriers (5CCs) supporting carrier aggregation in the 138-150 GHz range with 12 GHz bandwidth. The transceiver implements various circuit techniques to overcome the fT limitations of 28-nm CMOS, including differential amplifiers with cross-coupled capacitors and transformer-based inter-stage matching networks. The TX achieves a maximum EIRP of 45.5 dBm with saturated output power and demonstrates EVMs of 5.34-7.2% for 64-QAM signals at 30 Gbps. The RX exhibits less than 8 dB noise figure and achieves EVMs of 5.47-7.21% for 64-QAM signals at 24 Gbps. In over-the-air link testing at 2 m distance, the system achieves less than 4% EVM with both 64- and 256-QAM OFDM signals, representing the best performance reported to date for D-band CMOS implementations. The transceiver IC occupies 29.7 mm² die area and consumes 3,681 mW and 747 mW for TX and RX operation, respectively.

30 December 2012 in JOURNAL OF SEMICONDUCTOR TECHNOLOGY AND SCIENCE
Verified
Journal Article
Closed access
SKSeong-Kyun Kim
Seong-Kyun Kim
CCChenglin Cui
Chenglin Cui
BKByungsung Kim
Byungsung Kim
SKSoYoung Kim
SoYoung Kim
A fully-integrated low power K-band radar transceiver in 130 ㎚ CMOS process is presented. It consists of a low-noise amplifier (LNA), a downconversion mixer, a power amplifier (PA), and a frequency synthesizer with injection locked buffer for driving mixer and PA. The receiver front-end provides a conversion gain of 19 ㏈. The LNA achieves a power gain of 15 ㏈ and noise figure of 5.4 ㏈, and the PA has an output power of 9 ㏈m. The phase noise of VCO is -90 ㏈c/㎐ at 1-㎒ offset. The total dc power dissipation of the transceiver is 142 ㎽ and the size of the chip is only 1.2 × 1.4 ㎟.

2 October 2017 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
ASArda Simsek
Arda Simsek
SAShamsul Arafin
Shamsul Arafin
SKSeong-Kyun Kim
Seong-Kyun Kim
GMGordon B. Morrison
Gordon B. Morrison
LJLeif A. Johansson
Leif A. Johansson
MRMark J. W. Rodwell
Mark J. W. Rodwell
We design and experimentally demonstrate two chip-scale and agile heterodyne optical phase-locked loops (OPLLs) based on two types of InP-based photonic-integrated coherent receiver circuits. The system performance of the first-generation OPLL was improved in terms of offset-locking range, and power consumption with the use of a power efficient and compact photonic-integrated circuit (PIC). The second-generation PIC consists of a 60-nm widely tunable Y-branch laser as a local oscillator with a 2 × 2 multimode interference (MMI) coupler and a pair of balanced photodetectors. This PIC consumes only 184-mW power in full operation, which is a factor of 3 less compared to the first-generation PIC. In addition, the sensitivity of these OPLLs was experimentally measured to be as low as 20 μw. A possible solution to increase the sensitivity of these OPLLs is also suggested.

1 January 2020 in The Journal of Korean Academy of Prosthodontics
Verified
Journal Article
Open access
PDF file
SRSeung-Beom Ryu
Seung-Beom Ryu
SHSeong-Joo Heo
Seong-Joo Heo
JKJai-Young Koak
Jai-Young Koak
SKSeong-Kyun Kim
Seong-Kyun Kim
류승범, et al. J Korean Acad Prosthodont. 2020 Apr;58(2):103-109. https://doi.org/10.4047/jkap.2020.58.2.103

1 January 2015 in IEICE Electronics Express
Verified
Journal Article
Open access
CCChenglin Cui
Chenglin Cui
SKSeong-Kyun Kim
Seong-Kyun Kim
BKByungsung Kim
Byungsung Kim