21 May 2025 in Applied Spectroscopy
The measurement of thin films with a thickness in the nanometer range is challenging because it requires extensive sample preparation, vacuum condition, long measurement times or using test inks that additionally contaminate the surface. The detection of those films is crucial for production processes that rely on a boundary layer to create a proper interface like adhesive bonding, coating, or lithography in various industries like automotive, solar, energy storage and semiconductor manufacturing. Consequently, there is a need for quick, reliable measurement techniques with high sensitivity to ensure the technical cleanliness of the opaque surface. In this paper the feasibility of epi-detection with coherent Raman scattering (CRS) Imaging is investigated on different substrate materials and demonstrated to be a method for fast scanning of large nontransparent surfaces including chemical fingerprinting of the substances atop. Therefore, various samples with low surface energy filmic contaminations from polysiloxanes are produced and investigated with CRS Imaging, a technique mostly applied to biological samples with the novel use demonstrated here for surface contamination monitoring in material sciences.
8 March 2024 in Physica Status Solidi (a)
Coherent Raman Scattering Imaging offers quick and surface‐sensitive large‐area scans of specimens including fingerprinting of the substances, combined with low detection limits. By using a multi‐photon process, it offers orders of magnitude stronger surface signal in comparison to spontaneous Raman (SR) and fluorescence signals of the substrate are avoided by the detection principle and the near‐infrared laser wavelength. By exciting at a specific wavelength instead of measuring whole spectra the measurement time is remarkably reduced. Here, detecting organic thin films on glass surfaces is investigated. The detection of those thin films is relevant for production processes where the interfacial layer is influenced by the low surface energy of contaminants, especially polysiloxanes. The samples are manufactured by pipetting diluted polydimethylsiloxane (PDMS) in heptane in various concentrations (1%, 0.1%, 0.01%, and 0.001%) on glass substrates. After evaporation of the solvent, thin films of the silicone remain. The resulting average coverage of the thin films equals 100–0.1 μg cm−2. Measurements determine the detectability threshold with SR to 10 μg cm−2, while the acquired spectrum is used to determine characteristic peaks for the pump laser. Afterwards the samples are imaged at those wavenumbers with Coherent Raman Scattering (CRS) Imaging techniques providing a chemically‐specific contrast.
21 November 2025 in International Journal of Adhesion and Adhesives
2 July 2026 in Methods in Microscopy
Thin film contamination on critical surfaces is a significant cause of failure in different industries, including semiconductor, optical and medical manufacturing. Especially surfactants can alter surface properties that subsequent production steps and product quality are impacted. The contactless, non-destructive and fast detection of those trace organic residues remains a substantial metrological frontier. In this paper we establish epi-CARS Microscopy as a quantitative tool for mapping those contaminations. Using CARS in reflection on opaque surfaces poses certain obstacles, like non-resonant substrate background concealing the contaminants chemical signal and non-linear relationship between signal intensity and contaminant thickness. We describe the coherent interplay between the CARS signal arising from contaminant and substrate. By analyzing that signal, we decouple vibrational response from optical artifacts, thereby quantifying spatially resolved contaminant thickness. We validate this by analyzing silicon wafer samples contaminated with dimethylpolysiloxane in combination with AFM thickness verification. The epi-CARS detection limit for filmic contamination is determined, consequently more time-consuming and extensive techniques can be substituted. The ability to create quantitative maps of thin silicone films within seconds, achieving nanometer thickness sensitivity, is demonstrated. Quantitative epi-CARS is established as a fast, reliable, high-resolution and large-area analytical tool for surface cleanliness validation and contamination identification.